1Mii B06S Wireless Audio Adapter User Manual
- June 14, 2024
- 1Mii
Table of Contents
1Mii B06S Wireless Audio Adapter User Manual
lnstructions for operation
-
Connect the 806S+ to the audio input port of the power amplifier or active audio with an audio cable.
-
Connect the B06S+ to the power supply. the device will automatically power on.
-
Pairing – Pair 8065+ with your Bluetooth-enabled phone/computer/tablet and other devices.
• First time use: B065+ will automatically enter pairing mode after power on ( LED light flashes red and blue) .
• Activate Bluetooth on your phone or another device and click “BOBS+· to connect -
Wait far the connection to be successful, adjust the appropriate volume, and enjoy the music.
- How to enter pairing mode?
Press and hold the for 2 seconds after powered on. BOBS+ will enter the pairing mode(LED light flashes red and blue).
How to reset the device?
If BOBS+ cannot be connected or does not work normally, please refer to the
following methods to reset the device:
Turn on 806S+, and long press for 10 seconds to clear the paired devices, the
indicator light flashes purple quickly 3 times and soon enter pairing mode
automatically.
The Bluetooth® word mark and logos ore owned by the Bluetooth SIG, Inc. and any use of such marks by lMii Ltd. is under license. Other trademarks and trade names are those of their respective owners.
FCC:
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: ti) This device may not cause harmful
interference, ond (2) This device must accept any interference. Changes or
modifications not expressly approved by lMii Ltd. will void the user’s
authority to operate the equipment. This equipment has been tested and found
to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to piovide reasonable protection
against harmful interference in a residential installation. This equipment
generates, uses. and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference
to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
rodio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to on electrfcol outlet on o different c ircuit to that which the receiver is connected.
- Consult the manufacturer or an experienced radio/TV technician far help.
This product, like other radio devices, emits radiofrequency electromagnetic energy and operates within the guidelines found in radio frequency safety standards and recommendations. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature.
Warranty
Warranty service is limited to normal use. Any man-made damages such as from
connecting to an unsuitable power source. using an unsuitable device. or not
following the instructions, as well as damages that did not occur during
shipping, repairs. and adjustments not approved by the company. damages from
misuse. inattention, or improper installation may cause the warranty to be
ineffective immediately. This warranty does not include shipping fees.
Disposal
Always dispose of the used appliance at o recycling center.
– Do not dispose the used appliance together with household waste.
eVatmaster Consulting GmbH
Bettinostr. 30
60325 Frankfurt om Moi~Germany
contact@evatmaster.com
Scan the code to get more information
Operator: ANKBIT INTERNATIONAL LIMITED
Address: ROOM 803, CHEVALIER HOUSE, 45-51 CHATHAM ROAD SOUTH, TSIM SHA TSUI,
KOWLOON, HONG KONG
Manufacturer: ShenZhen Ankbit Electronics Limited
Address: Runfeng Industrial Par~ No. 4197 Baoan Blvd., Xixiang St., Booan
Oist., Shenzhen. China
We hope you never have the need, but if you do. our service is friendly and
hassle-free.
web: www.lmii.com
FCC ID: 2AJU3RT615
MADE IN CHINA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>