1Mii B05 Wireless Audio Adapter User Manual
- June 14, 2024
- 1Mii
Table of Contents
1Mii B05 Wireless Audio Adapter
In The box
PRODUCT OVERVIEW
| Product | Status | LED Indicator |
|---|---|---|
| Audio adapter | Charging | Solid red |
| Low battery | Flashes red | |
| Charging case | Battery indicators | 4 LED Indicators : 25% , 50%, 75%, |
100% battery capacity
Button| Operating| Function| LED Indicator Status
---|---|---|---
| Short press| Power on/ Reconnection| Flashes blue every 2s
Long press for 2s| Pairing| Flashes red and blue alternately
Long press for 5s| Power off| Solid red 2s then turn off
Long press for l0s| Reset| LED flashes purple once
Control functions
Note:
The specific format needs to be supported by the receiving device
Pairing
- First time use: tolce out the transmitter from the charge case, tear off the protective film, then put it back into the charging box to charge, the red LED light will automatically turn off when fully charged. than toke out the device. the B05 will automatically turn on and enter the pairing mode. (LED light flashes red and blue)
- Set your bluetooth headset to pairing mode, Wait and connected.
- After 805 connected with your Bluetooth headsets, plug the B05 Into airplane audio port, enjoy the music, movies.
*How to enter pairing mode?
Enter pairing mode by pressing MFB button for 2s.
How to pair the second device?
- set !he second headsets to pairing mode.
- Press and hold the MFB button 2s ta set B05 to pairing mode again, and the LED will flesh blue end red.
- wait until the connection is success M (LED stays purple for ls then off)
Note: In order to improve sound quality and compatibility, It Is recommended that you use a Bluetooth device with a Qualcanm chipset
How to restore factory settings?
You may need to reset 805 if it Is not working as expected.
When B05 is reset. expected all the paired devices information and function
settings will be cleared. Press and hold the MFB button for IDs ln the off
state. until LED flashes purple once then flashes red and blue alternately.
| LED Indicator | Status | |
|---|---|---|
| Flashes blue and red alternately | Pairing mode | |
| Stays white (red+ green+ blue) | Connected with aptX-LL codec | |
| Stays cyan (green+blue) | Connected with aptX codec | |
| Stays green | Connected with aptX codec | |
| Stays yellow (red+green) | Connected with aptX Adaptive codec | |
| Stays blue | Connected with SBC codec | |
| 3s | Flashes blue once every 3s | Disconnected |
| 2s | Stays purple blue + red 2s then off | Connected 2 devices |
1s
| Flashes purple once ( red + blue )| Restored factory default settings
Qaulcomm aptx is a product of Qualcomm technologies , inc and/or its subsidiaries.
CE
ANKBIT international. hereby declares that this product is in compliance with
the essential requirements and other relevant provisions of Directive 2014/ 53
/ EU.
In accordance with Article 10 (2) and Article 10 ( 10), this product is
allowed to be used in all EU member states.
Warranty
Warranty service is limited to normal use. Any man-made damages such as from connecting to an unsuitable power source, using an unsuitable device, or not following the instructions, as well as damages that did not occur during shipping, repairs, and adjustments not approved by the company, damages from misuse, inattention, or improper installation may cause the warranty to be ineffective immediately. This warranty does not include shipping fees.
Disposal
Always dispose of the used appliance at a recycling centre.
Do not dispose the used appliance together with household waste.
evatmoster Consulting GmbH
Bettina str. 30
60325 Frankfurt om Main.Germany
contact@evatmaster.com
Operator: Ankbit International Limited
Address: 45,-51 Chatham Road South, Tsim Sha Tsuis Kowloon, Hong Kong
Manufacturer: Shenzhen Ankbit Electronics Limited
Address : Runfeng Industrial Park, No. 4197 Baoan Blvd., Xixiang St.,
Ba:oan Dist.I Shenzhen, China.
FCC ID: 2AUFR-B05 IC: 29252-803 HVIN: 805
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>