TAKSTAR HM-300W Wireless Handheld Microphone Single Handheld User Manual

TAKSTAR HM-300W Wireless Handheld Microphone Single Handheld

Product Information

Product Name: HM-300W Wireless Handheld Microphone (Single Handheld)
Model: HM-300W

Features:

• Use with voice amplifiers or speakers in teaching, square dance, or tour guide activities

Package Contents:

• HM-300W Wireless Handheld Microphone (Single Handheld)

Specifications:

• Handheld Microphone: (No specific specifications provided)
• Receiver: (No specific specifications provided)

Function Descriptions:

• Wireless Handheld Microphone:

1. Power Switch: Press and hold the button for 1 second to turn it on

• Receiver:

1. Power Switch: Move the switch to the ON position to turn it on, and to the OFF position to turn it off
2. Indicator Light: When pairing, the blue light will flash. After successful pairing, the light will stay constantly on

Frequency Pairing Method:

1. Pairing Method: The product is pre-paired before leaving the factory. To repair or switch frequency:
2. Turn off the wireless handheld mic and receiver
3. Press and hold the power switch of the wireless handheld mic for 5 seconds until the indicator light flashes blue (pairing mode)
4. Turn on the receiver immediately, and it will automatically pair and connect
5. When the indicator lights of the receiver and the wireless handheld mic change from flashing blue to constantly on, it indicates successful pairing
6. Frequency Switching Method:
7. Turn on the wireless handheld mic and receiver, and ensure successful pairing
8. Press the power button of the wireless handheld mic once to switch to the next frequency channel (40 groups of frequency channels cycle switching)
9. The indicator light will flash twice in blue and then return to constantly on, indicating successful automatic frequency switching

Product Usage Instructions

Powering On/Off:

• Wireless Handheld Microphone: Press and hold the power switch button for 1 second to turn it on. Press and hold the power switch button again to turn it off.
• Receiver: Move the power switch to the ON position to turn it on. Move the power switch to the OFF position to turn it off.

Pairing:

1. Ensure both the wireless handheld microphone and receiver are turned off.
2. Press and hold the power switch of the wireless handheld microphone for 5 seconds until the indicator light flashes blue (pairing mode).
3. Immediately turn on the receiver.
4. The wireless handheld microphone and receiver will automatically pair and connect.
5. When the indicator lights of both devices change from flashing blue to constantly on, it indicates successful pairing.

Frequency Switching:

1. Ensure both the wireless handheld microphone and receiver are turned on and successfully paired.
2. Press the power button of the wireless handheld microphone once to switch to the next frequency channel. The indicator light will flash twice in blue and then return to constantly on, indicating successful automatic frequency switching.

Preface

Dear Customer,
Thank you for purchasing Takstar HM-300W Wireless Handheld Microphone (Single Handheld). To better understand and use the product, please read this manual carefully.
If you have any questions or suggestions, please contact our local dealer.

Features

• Designed to be used with sound equipment such as voice amplifiers and speakers in occasions like teaching, square dance, and tour guide.
• Utilizes UHF low-power wireless technology for strong anti-interference ability and over 40 meters of transmission distance.
• Adjustable frequency with 40 channels and the ability to use multiple sets of mics simultaneously.
• Automatic frequency pairing technology allows for easy one-key connection.
• Features a built-in lithium-ion battery that supports Type-C charging, avoiding the need for frequent battery replacement.
• Equipped with a ø6.35mm adapter, making it compatible with audio equipment that has ø3.5mm or ø6.35mm interfaces.

Applications
Use with voice amplifiers or speakers in teaching, square dance or tour guide activities.

Package Contents

• 1xHandheld Microphone
• 1xReceiver
• 1×6.35mm Adapter
• 1xCharging Cable
• 1xUser Manual

Specifications

Handheld Microphone

• Transducer: Dynamic
• Polar Pattern: Unidirectional
• Frequency Response: 60Hz-16kHz
•  Sensitivity: -55 (±3) dB (at 1KHz) (0dB=1V/Pa)
• UHF Frequency: 630MHz-698MHz
• UHF Use Distance: about 40m in open areas
• Battery Type: Li-ion
• Battery Spec: 3.7V/1800mAh
• Charging Voltage: DC 5V/1A
• Battery Life: about 15 hours
• Charging Time: about 2.5 hours
• Charging Interface: Type-C
• Dimensions: ø41mm185mm (DiaH)
• Weight: about 150g

Receiver

• UHF Frequency: 630MHz-698MHz
• UHF Use Distance: about 40m in open areas
• Battery Type: Li-ion
• Battery Spec: 3.7V/400mAh
• Charging Voltage: DC 5V/0.4A
• Battery Life: about 5 hours
• Charging Time: about 2 hours
• Charging Interface: Type-C
• Weight: about 22g

Note : The above data are measured by Takstar laboratory which has the final interpretation right!

Function Descriptions

Wireless Handheld Microphone

1. Power Switch: Press and hold the button for 1 second to turn the mic on or off. When the mic is turned on, press the button to switch between channels. When the mic is turned off, press and hold the button for 5 seconds to enter pairing mode.
2. Power Indicator: When the battery level is sufficient, the indicator light will be constantly on in blue. When the indicator light flashes red and blue, it indicates low battery and the mic needs to be charged. While charging, the indicator light will be constantly on in red, and the light will turn off when fully charged.
3. Charging Port: Insert the Type-C charging cable into this port and connect the other end to a universal USB charger to charge the mic.

Receiver

1. Power Switch: Move the switch to the ON position to turn on the receiver, and move it to the OFF position to turn it off.
2. Indicator Light: When pairing, the blue light will flash. After successful pairing, the blue light will be constantly on. When the battery is low, the indicator light will flash blue.
3. Charging Indicator: Solid red while charging and red turns off when fully charged.
4. Charging Port: Insert the Type-C charging cable into this port and connect the other end to a universal USB charger to charge the receiver.
5. Φ3.5mm Plug: Connect to audio equipment that has a ø3.5mm mic input jack. If the mic input jack of the equipment is ø6.35mm, use the included adapter to connect.

Frequency Pairing Method

Pairing Method
The product is pre-paired by default before it leaves the factory and will automatically connect when turned on, without the need for pairing. If there is signal int erference, follow the steps below to re-pair or swit ch frequency:

• Turn off the wireless handheld mic and receiver. Press and hold the power switch of the wireless handheld mic for 5 seconds until the indicator light flashes blue, indicating that it has entered pairing mode.
• Turn on the receiver immediately, and it will automatically pair and connect. When the indicator lights of the receiver and the wireless handheld mic change from flashing blue to constantly on, it indicates that the pairing is successful.

Frequency Switching Method
Turn on the wireless handheld mic and receiver, and ensure that the pairing is successful. Press the power button of the wireless handheld mic once to switch to the next frequency channel (40 groups of frequency channels cycle switching). The indicator light will flash twice in blue and then return to constantly on, indicating that automatic frequency switching is successful.

Safety Instructions

To avoid electric shock, overheating, fire, radiation, explosion, mechanical risk, and injury or property loss due to improper use, please read and observe the following items before use:

1. Please check if the power of the connected equipment matches with that of this product before operation. Adjust the volume to the proper level during operation. Do not operate at over-power or high-volume level for extended time to avoid product malfunction.
2. If there is any abnormality during use (e.g., smoke, strange odor), please kill the power switch and unplug from the power source, then send the product to the local after-sales service for repair.
3. Keep this product and its accessories in a dry and ventilated area. Do not store in a humid or dusty area for an extended time. Keep away from fire, rain, liquid intrusion, bumping, throwing, vibrating, or from blocking any ventilation openings, to prevent malfunction.
4. Please abide by safety rules during operation. Do not use the product in places prohibited by laws or regulations to avoid accidents.
5. Do not disassemble or repair the product by yourself to avoid injury. If you have any questions or require any services, please contact our local after-sales service.
6. The altitude and climate conditions applicable to this product are determined by the power supply equipment selected.

Label Meanings

This symbol indicates that this product should not be disposed of with your household waste, according to the WEEE directive (2012/19/EU) and your national law. This product should be handed over to an authorized collection site for recycling waste electrical and electronic equipment (WEEE). Improper handling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with WEEE. At the same time, your cooperation in the correct disposal of this product will contribute to the effective usage of natural resources. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, waste authority, or your household waste disposal service.

About This Manual

This manual contains up-to-date technical specifications as of printing. However, specifications contained herein may not conform to your particular product since Takstar is constantly improving its products. Also, specifications, devices or accessories available may vary from region to region. If you have any questions, please contact our local sales outlet. For the latest version/more information, please visit our website: https://www.takstar.com/

Scan for more product information

Guangdong Takstar Electronic Co., Ltd.
Address : No. 2 Fu Kang Yi Rd., Longxi Boluo Huizhou, Guangdong 516121 China
Tel : 86 752 6383644 Fax : 86 752 6383952
Email : sales@takstar.com
Website : www.takstar.com

References

• 得胜官网-广东得胜电子有限公司
• 得胜官网-广东得胜电子有限公司

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>