TAKSTAR MS-L2 Conference Microphone User Manual
- June 5, 2024
- TAKSTAR
Table of Contents
TAKSTAR MS-L2 Conference Microphone User Manual
Preface
Dear Customer,
Thank you for purchasing Takstar MS-L2 Conference Microphone. In order to
better understand and use the product, please read this manual carefully. If
you have any questions or suggestions, please contact our local dealer.
Features
- Dual-line output for more stable audio with higher fidelity.
- Supercardioid pattern effectively filters out side noise for clear vocal.
- Dual capsule with superb pickup distance, leaving out zero detail.
- Utilizes line preamplifier for wider application.
- Precision circuit coupled with advanced audio tech for extremely low self-noise.
- 120° rotatable mic for more fitting pickup angle.
- Wide, flat frequency response; handles long/short pickup distance with ease.
- High-density windscreen effectively prevents wind noise or plosives or dust.
- All Aluminum alloy construction, double premium.
- Ease of positioning with ergonomic tension knob and clutch.
- Solid, stable metal base.
- Extra-long, pull-resistant cable that transmits audio without loss.
Package Contents
Microphone Set (incl. Capsule, Boom, Shaft, Base) 1 set
User Manual 1 pc
Product Certificate 1 pc
Windscreen 2 pc
10m Dual-Core XLR Cable (OD 6.0mm) 2 pc
Applications
Suitable for conference, speech, ceremony and large concerts.
Specifications
- Transducer: electret condenser (dual output)
- Frequency Response(Hz): 30Hz-16kHz
- Polar Pattern: supercardioid
- Output Impedance (0): 750 bal, 2000 unbal
- Sensitivity: -43dB±2dB
- Power Supply (V): 48V phantom power
- Adjustable Height: 0.1-1.65m
- Mic Weight: 11KG
- Mic Cable Length/Specs: 10m two-conductor XLR Female + Male
- Output: balanced output
- Base Dimensions (mm): cone shape, Diameter 240, Height 60
- Interference Resistance: cell phones, electromagnetics, high frequencies
Function Descriptions
- Microphone Capsule: records pure audio by effectively filtering out low-frequency noise.
- Boom: height adjustable via boom clutch.
- Tension Knob: joins the boom with stand shaft, for capsule height and angle adjustment.
- Shaft
- Base: connects to the shaft; for stabilizing.
- Shaft Fixing Nut: for securing the shaft to the base without wobbling.
Operation Instructions
-
First, connect the shaft to the base, tighten the fixing nut at the bottom, then install the boom arm, adjust the mic angle, and connect the mic output with input socket of the amplifier or audio equipment via the 10m dual-core cable (OD 6.0mm), as shown in the following diagrams:
-
Connect to a track mixer with a 48V phantom power supply:
-
Connect to a mixer with a 48V phantom power supply:
-
Connect to a phantom power supply directly:
-
Turn the volume of theamplifier and other audio equipment to zero before turning them and the mic on; then gradually increase their volume to an appropriate level.
-
Recommended distance from the mic is about 20-50cm when speaking.
Troubleshooting
Nosound from theconference mic:
- Check whether the conference mic is properly connected to the amplifier and audio equipment; please re-plug and retry.
- Check whether theconnected equipment provides 48V phantom power, and whether the 48V switch is set to “ON”.
- Check whether the mic volume of the connected equipment is set too low; adjust and see if it becomes normal.
- Replace the connection cable to rule out cable problem.
Safety Instructions
To avoid electric shock, overheat, fire, radiation, explosion, mechanical risk and injury or property loss due to improper use, please read and observe the following items before use:
- Please check if the power of the connected equipment matches with that of this product before operation. Adjust the volume to proper level during operation. Do not operate at over-power or high-volume level for extended time to avoid product malfunction or hearing impairment.
- If there is any abnormality during use (e.g., smoke, strange odor), please kill the power switch and unplug from power source, then send the product to the local dealer for repair.
- Keep this product and its accessories in a dry and ventilated area. Do not store in a humid or dusty area for extended time. Keep away from fire, rain, liquid intrusion, bumping, throwing, vibrating, or from blocking any ventilation openings, to prevent malfunction.
- The product must, when installed on walls or ceilings, be fixed firmly in place at adequate strength to prevent from falling.
- Please abide by safety rules during operation. Do not use the product in places prohibited by laws or regulations to avoid accident.
Scan for more product information
Guangdong Takstar Electronic Co., Ltd.
Address: No. 2 Fu Kang YiRd., Longxi Boluo
Huizhou, Guangdong 516121 China
Tel: 86 752 6383644 Fax: 86 752 6383952
Email: sales@takstar.com
Website: www.takstar.com
