TAKSTAR WPM-20T Professional Wireless Stage Monitoring System Instruction Manual

TAKSTAR WPM-20T Professional Wireless Stage Monitoring System

Product Information

Specifications

• Frequency Range: 530-595MHz
• Compliance: Part 15 of FCC Rules
• Operating Conditions: Avoid harmful interference
• Radiation Exposure: Complies with FCC limits
• Minimum Distance: 20cm between radiator and body

Product Usage Instructions

Compliance and Safety
This device operates within the frequency range of 530-595MHz and complies with Part 15 of the FCC Rules. To ensure safe operation, please adhere to the following:

1. Avoid causing harmful interference to other devices.
2. Accept any interference received, including that which may cause undesired operation.
3. Do not make changes or modifications not approved by the responsible party.
4. Maintain a minimum distance of 20cm between the radiator of this equipment and your body.

Installation and Operation
To install and operate the device:

1. Place the equipment in a suitable location with proper ventilation.
2. Ensure the device is securely connected to a power source.
3. Follow any specific setup instructions provided in the user manual.
4. Power on the device and adjust settings as needed within the specified frequency range.

FAQ

• Q: What should I do if I encounter interference while using the device?
  A: If you experience interference, try adjusting the device’s placement or frequency settings. Ensure no other electronic devices are causing interference nearby.

• Q: Can I modify the device for better performance?
  A: No, any modifications not approved may void your authority to operate the equipment and could lead to unsafe operation.

INTRODUCTION

Wireless Personal monitoring system with unmatched sound quality, stable radio frequency performance and leading in the class of setup functions, to meet the requirements of most of the most demanding professional monitoring applications High-frequency wireless back listening transmitter, high-quality back listening. The use of superb circuit technology, allround no dead Angle reception, so that the received signal is more stable, you can operate and switch the preset 10 groups of frequency excellent and reliable technology, to help you perform more excellent and successfully.

The TFT-S4 is a wireless stereo Fanny pack receiver that works with a listening system. With 24-bit digital audio performance for clear sound quality and an effective 50-meter operating range, the TFT-S4 enables reliable wireless freedom of performance, covering every corner of the stage.

MAIN FUNCTION

• Reliable 24-bit digital audio processing to create superior personal monitoring mixing for each performance.
• One audio channel is sent to a waist pack receiver at a distance of up to 50 meters, while digital audio technology reliably ensures clear sound quality with neither noise nor signal loss.
• Rugged half-rack transmitter with simple front panel control.
• Full-color TFT display, wide viewing Angle, high clarity, all working conditions at a glance.
• The rear panel balances inputs and loop outputs to provide full connectivity to the audio source and other units.

SYSTEM COMPONENT

TRANSMITTER DIAGRAM

1. Switch on/off button
2. Connect the 6.35mm jack for the earphone
3. Volume knob
4. Function setting knob button
   • Press the Settings knob: Select Save Settings and return to the main screen
   • Rotate the Settings knob to change the value of a menu item
5. TFT display

1. Power socket
   Used for external DC power supply 12V-1A

2. Wired microphone gain key

3. Audio input (left/right)
   For connecting balanced or unbalanced outputs, any connector can be used for mono inputs acceptable 1/4 inch or plug XLR connector 4. Loop output (left/right)
   The audio signal sent to the transmitter can be copied to other devices

4. BNC port for the antenna

RECEIVER DIAGRAM

1. Antenna
2. On/Off button (single press mute)
3. Type-C charging port
4. 3.5MM input port
5. 3.5 Headphone jack
6. Volume plus
7. Volume reduction
8. OLCD display
9. Function key (single press to select function)

TRANSMITTER DISPLAY OVERVIEW AND OPERATION

1. Channel display

• Short press the function setting button, the channel will display the blue state to enter the channel setting, rotate the knob to select the channel (there are 01-10 channels), press the setting knob to confirm and exit the option, and display the currently selected channel. 2. Channel display
• Short press the function setting button, the channel will display blue state to enter the channel setting, rotate the knob to select the channel (single channel, stereo), press the setting knob to confirm and exit the option, and the currently selected channel will be displayed. 3. Select high/low transmit power
• Short press the function setting button, the power display blue state to enter the power setting, rotate the knob to select the power (high, low), press the setting button to confirm and exit the option, the current selection is displayed. 4. Gain display
• Short press the function setting button, the gain will be displayed in blue to enter the gain setting, rotate the knob to select the gain (high and low), press the setting knob to confirm and exit the option, and the current selection will be displayed. 5. Lock
• Long press the set knob key to lock the transmitter, and long press the set knob key again to unlock. Press the setting button, rotate the knob to select (on, off) Press the setting knob to confirm and exit the option, and the current selection is displayed. 6. Input level display
• PEAK light on indicates that the input level is too high

TECHNICAL PARAMETER

Transmitter

• Frequency range: 530-595MHz
• Audio input: Max input +18dBu
• Power supply: 12-15 V DC
• Consumption: 15V 300 mA
• Transmitted power: 10mW~50mW (optional)

Receive

• Frequency range: 530-595MHz
• Receiving sensitivity: -95dBm
• The battery: Lithium battery 4.2V
• Frequency response: 20-20,000 Hz
• Audio output power: 100mW (1kHz @&It; 1% distortion, peak power @16)
• Consumption: 200 mA

System

• Distortion: &It; 0.1%
• Signal-to-noise ratio: 100dB
• Frequency range: 530-595MHz
• Bandwidth: 2MHz
• Dynamic range: 100dB
• Audio sampling: 24 bit/192 kHz
• Launch system: Digital modulation
• Audio response time: &It; 5 ms
• Audio coding: Digital coding
• Frequency response: 20-20,000 Hz
• Service distance: 50 meters

FCC

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. Suppose this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. In that case, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>