TAKSTAR PRO70 Monitor Headphones User Manual
- June 1, 2024
- TAKSTAR
Table of Contents
TAKSTAR PRO70 Monitor Headphones
Product
Information
Specifications
- Product Name : PRO 70 Monitor Headphones
- Model Number : 400 6828 333
- Manufacturer: Takstar
- Application : Live monitoring, recording monitoring
Product Usage Instructions
Operating Instructions
Audio Interface: Ensure the headphones are connected to the audio output source securely.
Correct Operation
- To prevent hearing loss, always start with the volume at a minimum before wearing the headphones. Gradually increase it to a comfortable level. External noise above 85dB can lead to hearing damage.
- Be mindful of the volume level and duration of use. Higher volumes require shorter listening times. Listening at high volumes for extended periods can result in hearing damage.
- Noise Level Chart:
Sound Source| Noise Level (dB)| Consequence on Hearing
---|---|---
Whisper| 30dB| Very quiet
Quiet office| 50-60dB|
Vacuum cleaner/ hair dryer| 70dB|
Food processor| 85-90dB|
Garbage cleaning machine/ cement mixer| 100dB|
Electric saw/ electric drill| 110dB|
Rock concert (subjective)| 110-140dB|
Maintenance Instructions
- Keep the headphones in a dry and clean environment to prevent damage from water, drops, or collisions.
- Avoid using the headphones in high temperature or humidity for prolonged periods to prevent device damage or reduced lifespan.
- Avoid exposing the headphones to strong magnets as it can affect sensitivity and performance.
- Avoid using harsh chemicals or detergents for cleaning; use a soft, dry cloth instead.
- Avoid scratching the surface of the headphones with sharp objects.
- If not in use for an extended period, store the headphones in a clean, dry area away from high temperatures and humidity.
Cautions
DANGER: Do not wear or place the headphones too close to a pacemaker (less than 10cm) for personal safety.
FAQs
- Q: What should I do if the headphones get wet?
- A : If the headphones get wet, immediately disconnect them from the audio source and allow them to air dry completely before use to prevent damage.
- Q: Can I replace the ear cushions of the PRO 70 headphones?
- A : Yes, you can replace the ear cushions following the manufacturer’s instructions to maintain comfort and hygiene.
Preface
Dear Customer,
Thank you for purchasing Takstar PRO 70 Monitor Headphones. To better understand and use the product, please read this manual thoroughly. If you have any questions or suggestions, please contact our local salesoutlet.
Features
- The new Ø40mm neodymium driver produces outstanding sensitivity, response, and dynamics.
- Advanced composite diaphragm delivers distinct bass, full midrange, and airy highs.
- Closed-back cups provide excellent noise isolation for undisturbed listening.
- Compact coiled cable flexes freely without tangling hassles.
- Skin-friendly earpads and headbands ensure fatigue-free wearing for an extended time.
- Ergonomic, adjustable design fits comfortably on various head sizes or shapes.
- Includes Ø6.35mm adapter for compatibility with a wide range of audio devices.
Applications
Live monitoring, recording monitoring.
Package Contents
- 1 × Headphones
- 1 × Ø6.35mm Adapter
- 1 × User Manual
Specifications
- Transducer Type : Dynamic Coil
- Driver Diameter: Ø40mm
- Frequency Response: 20Hz-20kHz
- Sensitivity: 102±3dB at 1kHz
- Impedance: 32Ω
- Peak Power : 50mW
- Rated Power: 30mW
- Cable: Ø3mm*3m
- Connector: Ø3.5mm/Ø6.35mm TRS, Gold-Plated
- Product Weight : Approx. 290g
- Note : The above data are measured by Takstar laboratory which has the final interpretation right!
Operating Instructions
Connection Diagram:
Insert the headphone plug into the Ø3.5mm headphone jack of the audio interface or other audio device for monitoring. If the audio interface has a Ø6.35mm headphone jack, use the included Ø6.35mm adapter to connect.
Correct Operation
For safe and comfortable operation, please read carefully and abide by the following items:
- To avoid hearing loss, set the volume of the player to a minimum before connecting the headset. After putting the earphones on, increase the volume to a proper level. Noise is measured in decibels (dB). Any outside noise of 85 decibels or more will cause gradual hearing loss.
- Please pay attention to your operation habits! Volume and duration are proportional to hearing loss. The higher the volume, the shorter the time you should listen; the more comfortable the volume is, the longer you can listen. Listening at high volume for long will cause damage to your hearing.
This dB level chart compares some common noise sources and their potential danger to your hearing:
Maintenance
- Please keep it in a dry and clean environment. During operation, prevent damage from water ingress, drop or collision.
- Operating the headset in high temperatures or high humidity for long can lead to device damage or shortened service life.
- Keep the headset away from strong magnets to avoid demagnetizing and decreased sensitivity and performance.
- Do not use strong chemicals or detergents for cleaning.
- Do not scratch the product surface with sharp objects.
- Store in a clean, dry area if not used for a long period. Keep and use away from areas of high temperature and humidity.
Cautions
DANGER
WARNING
Safety Instructions
To avoid electric shock, overheating, fire, radiation, explosion, mechanical risk, and injury or property loss due to improper use, please read and observe the following items before use:
- Please check if the power of the connected equipment matches with that of this product before operation. Adjust the volume to the proper level during operation. Do not operate at over-power or high-volume levels for an extended time to avoid product malfunction.
- If there is any abnormality during use (e.g., smoke, strange odor), please kill the power switch and unplug from the power source, then send the product to the local after-sales service for repair.
- Keep this product and its accessories in a dry and ventilated area. Do not store in a humid or dusty area for an extended time. Keep away from fire, rain, liquid intrusion, bumping, throwing, vibrating, or from blocking any ventilation openings, to prevent malfunction.
- The product must, when installed on walls or ceilings, be fixed firmly in place at adequate strength to prevent from falling.
- Please abide by safety rules during operation. Do not use the product in places prohibited by laws or regulations to avoid accidents.
- Do not disassemble or repair the product by yourself to avoid injury. If you have any questions or require any services, please contact our local after-sales service
Label Meanings
This device is compliant with the limits of the European Council Directive on the approximation of the laws of the member states relating to electromagnetic compatibility according to RL2004/108/EG and European Low Voltage Directive RL2006/95/EG.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the complying party may cause the user to lose permission to operate the device.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
This symbol indicates that this product should not be disposed of with your household waste, according to the WEEE directive (2012/19/EU) and your national law. This product should be handed over to an authorized collection site for recycling waste electrical and electronic equipment (WEEE). Improper handling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with WEEE. At the same time, your cooperation in the correct disposal of this product will contribute to the effective usage of natural resources. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, waste authority, or your household waste disposal service.
About This Manual
This manual contains up-to-date technical specifications as of printing. However, specifications contained herein may not conform to your particular product since Takstar is constantly improving its products. Also, specifications, devices or accessories available may vary from region to region. If you have any questions, please contact our local sales outlet.
For the latest version/more information, please visit our website: https://www.takstar.com/
Copyright ©2023 TAKSTAR. TAKSTAR, 得胜 and their respective logos are registered trademarks or trademarks of Guangdong Takstar Electronic Co., Ltd. in the PRC, and/or other countries. All other trademarks are the property of their respective
Scan for more product information
Designed & Manufactured by:
Guangdong Takstar Electronic Co., Ltd. Address: No.2 Fu Kang Yi Rd., Longxi Boluo Huizhou, Guangdong 516121 China
- Tel: 86 752 6383644
- Fax: 86 752 6383952
- Email: sales@takstar.com
- Website: www.takstar.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>