TAKSTAR WDA-1200 Active Mobile Speaker User Manual
- June 4, 2024
- TAKSTAR
Table of Contents
TAKSTAR WDA-1200 Active Mobile Speaker User Manual
Preface
Dear Customer,
Thank you for purchasing the TAKSTAR WDA-1200 Active Mobile Speaker, which
features high fidelity sound, wide frequency response, stable performance, as
well as low distortion and noise.
It can be used with two wireless microphones simultaneously in various
occasions such as training, speech, outdoor promotions and dance parties. In
order to better understand and use this product, please read the user manual
carefully before use.
If you have any questions or suggestions, please contact our local dealer.
Features
- Multifunctional active speaker system with audio output up to 120W.
- UHF dual channels for reliable transmission and simultaneous use with two wireless microphones.
- Independent volume controls, EQ, Echo and 5 MIC modes, adaptable to various occasions.
- Music playback function that supports playing audio files on flash drive and TF card.
- Bluetooth music playback which links to Bluetooth devices like PC, phone and tablet.
- DSP Vocal Removal function allows you to enjoy karaoke anywhere, anytime.
- 3.5mm & RCA Audio inputs/outputs for connection with external audio devices like TV, PC, CD and MP3 player.
- Two 6.35mm connectors for wired microphone input.
- Built-in 11.V/10,000 mAh rechargeable li-ion battery, suitable for indoor/outdoor use.
Technical Specifications
- Speaker Model: WDA-1200
- Amplifier Type: Class-D
- Rated Power: 120W
- Bass: 12’’, 38mm voice coil, 140mm magnet, 3Ω
- Mid: 6.5’’, 25mm voice coil, 80mm magnet, 3Ω
- Treble: 25mm voice coil, 80mm magnet, 6Ω
- Frequency Response: 80Hz-15KHz
- Built-in Battery: 11.1V/10,000mAh rechargeable li-ion battery
- Operation Time: 6.5h
- Charging Time: 4.5h
- THD: ≤0.5%
- UHF Range: 640MHz-690MHz
- Wireless Mic Sensitivity: -80dBm
- Wireless Mic Frequency Response: 100Hz-10KHz
- Wireless Mic Operating Range: 50m (open area)
- Wireless Mic Battery Life: 10h
- Power Requirement: 100~240V AC, 50/60Hz
- Operating Temperature: −10°C-45°C
- Speaker Dimensions (LWH): 355325650mm
- Net Weight: approx. 18kg
Note: The above data is measured by Takstar laboratory, and Takstar has the final interpretation right!
Standard Configuration:
- WDA-1200 Speaker × 1
- UHF Wireless Mic × 2
- Remote Control × 1
- AC Power Cord × 1
- AA Battery × 4
- UHF Antenna × 2
- AAA Battery × 2
- User Manual × 1
Panel Function Description
- LCD Display: display amplifier work mode and status.
- SD Card Slot: by inserting an SD card, the speaker will auto play music stored in the card.
- USB Port: by inserting a USB flash drive, the speaker will auto play music stored in the drive.
- Music Pause/Play Button: press to play/pause.
- Switch Mode: press to switch mode: Bluetooth, Line IN or Media Play. Press and hold to enable/ disable vocal removal function.
- Loop: press to switch from Loop Single to Loop All.
- Previous Song: press to play the previous song.
- Next Song: press to play the next song.
- Recording Function: insert a USB/SD Card, then press Recording button to start recording your speech or singing into an audio file onto the USB/SD Card; press Recording button again to end the recording. By re-inserting the USB/SD Card, the speaker will play the recorded audio.
- Mic Mode: microphone mode controls (which are, Original, Pro, Popular, Indoor, and Outdoor).
- Wireless Mic-A Antenna Port: connect with an external antenna to boost signal strength.
- Wireless Mic-A Signal LED: lit when wireless mic-A is connected.
- Wireless Mic-A Volume Control Knob
- Wireless Mic-B Signal LED: lit when wireless mic-B is connected.
- Wireless Mic-B Volume Control Knob
- Wireless Mic-B Antenna Port: connect with an external antenna to boost signal strength.
- Low-Power Indicator: lit in red when battery is about to run out and requires charging as soon as possible.
- Charging Indicator: lit in red during charging, in green when fully charged.
- Power Switch: turn on/off speaker power.
- Audio Output: can be used to output the speaker audio towards other audio input devices, e.g., recorder, speaker, power amplifier.
- RCA Stereo Input: used to connect with an external audio source (DVD, PC, phone) via an RCA stereo cable for sound reinforcement.
- 3.5mm Headphone Jack: used to connect with an external audio source (DVD, PC, phone) via a 3.5mm audio cable for sound reinforcement.
- Guitar Input: used to connect with a guitar via a 6.35mm cable for sound reinforcement.
- Mic Input: input for a wired microphone.
- Mic Master Volume Control Knob
- Mic Bass Volume Control Knob
- Mic Treble Volume Control Knob
- Mic Echo Control Knob: controls the duration of echo for microphone.
- Mic Delay Control Knob
- Mic Priority: auto lowers music volume when speaking through microphone and resumes when the speech ends.
- Music Bass Volume Control Knob
- Vocal Removal: one-key vocal removal which can turn a music into an accompaniment track for karaoke uses.
- Music Treble Volume Control Knob
- Music Master Volume Control Knob
Remote Control Description
- Power Button
- Number Buttons: for music folder selection
- MP3 Repeat Mode Selection
- Previous Song
- Volume Down
- Mode Selection
- Radio Channel –
- EQ Mode Controls (which are, Normal/Pop/ Rock/Jazz/Classic/Country)
- Radio Channel +
- Next Song
- Play/Pause
- Volume Up
Note: This remote control uses two AAA batteries.
Wireless Microphone User Instructions
Power ON/OFF
Power ON: install two 1.5V AA batteries, press the Power button to turn on the microphone, or press and hold the Power button to turn off. (DO NOT install the batteries in wrong direction)
Switch Frequency
Noise during use, short transmission distance and pickup of other wireless microphone signals may be the results of frequency interference, which can be avoided by switching frequency. Instructions: when powered on, press Frequency Switch button to select a desired frequency (16 channels in total). Receiver on the speaker will auto sync when frequency is switched. To select other channel, repeat the above steps. (If the interference issue remains,try the steps in below Instruction 3.)
ID Lock / Sync
First, turn off the speaker and the microphone. Press and hold the Sync button, then the Power button as well until the LCD screen flashes for 2s. Turn on the speaker power, after 3s, press the Sync button on the wireless mic to complete syncing. Sync/Lock is successfully when the Wireless Mic Indicator on the speaker is lit. One microphone can sync with multiple speakers, in other words, the speakers will receive signal from this microphone. To un-sync with a speaker, simply sync with another desired speaker at a different frequency. In case your microphone is broken and a new one is replaced by the manufacturer, follow these steps to sync.
Microphone Factory Reset
When the batteries are not installed, press and hold Sync button until you have installed the batteries. This will reset the device to factory defaults. (Pair with your speaker after reset)
Battery Status
When the battery icon flashes on the LCD display, it’s time to prepare new batteries. When the icon turns from bright to dark and bright again, or the whole LCD is flashing, please change the batteries timely as that they are now dry and cannot properly power the microphone any more.
Cautions
- Place the microphone out of reach of children.
- Take out the batteries when the microphone is not used.
- Do not randomly press setting buttons during normal use.
- Please replace the batteries when the microphone automatically turns off.
Safety Precautions
To avoid electric shock, overheat,fire,radiation, explosion, mechanical risk and injury or property loss due to improper use, please read and observe the following items before use:
- Please check if the power of the connected equipment matches with that of this product before operation. Adjust the volume top roper level during operation. Do not operate at over-power or high-volume level for extended time to avoid product malfunction or hearing impairment.
- If there is any abnormality during use (e.g., smoke, strange odor), please kill the power switch and unplug from power source,then send the product to the local dealer for repair.
- Never use battery with damaged insulation should a detachable battery is required;Do not charge a non-rechargeable battery.
- Dispose the waste battery in designated waste bin as per refuse classification; do not use as children toy or discard directly to avoid safety hazard or environmental damage.
- Keep this product and its accessories in a dry and ventilated area.Do not store in a humid or dusty area for extended time.Keep away from fire,rain, liquid intrusion, bumping,throwing, vibrating, or from blocking any ventilation openings, to prevent malfunction.
- The product must, when installed on walls or ceilings, be fixed firmly in place at adequate strength to prevent from falling.
- Please abide by safety rules during operation.Do not use the productin places prohibited by laws or regulations to avoid accident.
- Do not disassemble or repair the product by yourself to avoid injury. If you have any questions or require any services, please contact our local dealer.
- Put this product at least 60cm away from P Cor TV due to its strong magnet inside.
- The product has a built-in rechargeable lithium-ion battery.Please recharge once every three months if not used for extended periods.Recommended to recharge timely after each use.
- Only use lithium-ion battery of the same specifications as the original for replacement. Dispose any obsolete battery properly.
- Keep away from high temperature.
- Place in a ventilated area.
- Keep away from humid areas.
- Turn off the product power before unplugging the power cord.
- Unplug from power source when not used for extended periods.
- Place in a well-ventilated area,recommended to be at least 10cm away from surrounding objects. Do not block ventilation openings with objects such as newspaper,table cloth and curtain.
- The product should be connected to a mains outlet with grounding protection.
Suitable only for 2000m altitudes below 2,000m
Suitable only for non-tropical climates
Scan for more product information.
Guangdong Takstar Electronic Co., Ltd.
Address: No. 2 Fu Kang YiRd., Longxi Boluo
Huizhou, Guangdong 516121 China
Tel: 86 752 6383644
Fax: 86 752 6383952
Email: sales@takstar.com
Website: www.takstar.com
