TAKSTAR WPM-500 Wireless Monitor Headphones User Manual
- June 4, 2024
- TAKSTAR
Table of Contents
WPM-500 Wireless Monitor Headphones
User Manual
WPM-500 Wireless Monitor Headphones
Preface
Dear Customer,
Thank you for purchasing Takstar WPM-500 Wireless Monitor Headphones. In order
to better understand and use the product, please read this manual carefully.
If you have any questions or suggestions, please contact our local dealer,
Features
- Wireless neckband headphones are tailor-made for monitoring live stream recording and the like.
- 2.4GHz wireless transmission, stable and works up to 10m.
- Easily pair multiple headphones in one system for parallel group monitoring.
- Studio monitoring level, synchronized A/V at low latency for smoother streaming and interaction.
- Quick pairing, and auto reconnecting without tedious steps.
- HD stereo audio at 48kHz sample rate, with rich and dynamic music performance.
- Designed with wires that loop around your ears for better security during movement.
- The transmitter adopts ‘a 33.5mm audio interface for easy connection with audio devices like sound cards or mixers.
- Built-in lithium-ion battery, 6-8 hour battery life with 2-hour charging.
Applications : Live e-commerce, monitor live stream and recording
Specifications
Transmitter Specifications:
- Battery Capacity: Li-Po, 3.7V/450mAh
- Charging Time: about 2.5 hours
- Charging Voltage/Current: DC 5V/300mA
- Transmission Frequency: 2.4GHz
- Battery Life: about 6 hours (when fully charged)
- Weight: 22g
Receiver Specifications:
- Battery Capacity: Li-Po, 3.7V/240mAh
- Charging Time: about 2.5 hours
- Charging Voltage/Current: DC 5V/200mA
- Battery Life: about 8 hours (when fully charged)
- Frequency Range: 20Hz-20KHz
- Transmission Frequency: 2.4GHz
- Weight: 33g
System Specifications
- Low Latency Distance: z10 meters
- Audio Delay: s20ms
- Frequency Response: 20Hz-20KHz (®1KHz, -3dB)
- Signal-to-Noise Ratio: 40dB(A+)
- System Noise Floor: s-90db(A+)
Note: The above data are measured by the Takstar laboratory.
Function Descriptions
Transmitter
- Power button: press and hold for 2s to turn on/off the transmitter With the device powered on, LED
- glows blue; once powered off, LED goes off.
- LED indicator: turns solid red while charging; stops glowing red when fully charged; flashes red if low battery; flashes blue rapidly while pairing and resumes solid blue when paired.
- Pair key: with the device powered on, press and hold for 2s to start pairing.
Wireless Headphones
- Power button: press and hold for 2s to turn on/off the headphones.
- LED indicator: once powered on, flushes blue slowly while trying to auto-reconnect recently paired transmitter, and turns solid blue when reconnected successfully; flushes blue rapidly while pairing and resumes solid blue when paired.
- Pair key: with the device powered on, press and hold for 2s to start pairing.
- Volume control: press (+1 to gradually increase headphone volume, press and hold to increase rapidly; press (-1 to gradually decrease headphone volume, press and hold to decrease rapidly. There are 10 volume levels in total.
Pairing Transmitter & Headphones: The transmitter and the headphones are already paired before shipping out factory and will auto-connect to each other once powered on. However, if any one of them is replaced, follow the below steps for pairing:
- Turn on both the headphones and the transmitter.
- Press and hold the pair keys on both the headphones and the transmitter for 2s until their LEDs flash rapid blue as they start pairing. Once paired successfully, their LEDs will resume solid blue.
Note: In case of pairing malfunction, try system reset by pressing and
holding both the power button and pairing button while connecting the
headphones to a Type-C charging cable.
Monitoring Live Stream:
- Once the transmitter and headphones are paired successfully, insert the supplied 3.5mm-to-6.3mm adapter plug into the headphone output of your audio interface.
- Insert the transmitter into the adopter plug to start monitoring your live stream. (The adapter plug is not necessary if the audio interface has a o3.5mm headphone output.)
Note: In order to avoid signal interference, when your audio interface is connected to a smartphone via Bluetooth, you need to add a 3.5mm extension cable in between the transmitter and the audio interface.
Safety Instructions
To avoid electric shock, overheating, fire, radiation, explosion, mechanical risk, and injury or property loss due to improper use, please read and observe the following items before use:
- Please check if the power of the connected equipment matches that of this product before operation. Adjust the volume to the proper level during operation. Do not operate at over-power or high-volume levels for an extended time to avoid product malfunction or hearing impairment.
- If there is any abnormality during use (e.g., smoke, strange odor), please kill the power switch and unplug from the power source, then send the product to the local dealer for repair.
- Keep this product and its accessories in a dry and ventilated area. Do not store in a humid or dusty area for an extended time. Keep away from fire, rain, liquid intrusion, bumping, throwing, vibrating, or blocking any ventilation openings, to prevent malfunction.
- Please abide by safety rules during operation. Do not use the product in places prohibited by laws or regulations to avoid accidents.
- Do not disassemble or repair the product by yourself to avoid injury. If you have any questions or require any services, please contact our local dealer.
Label Meanings
This device is compliant with the limits of the European Council Directive
on the approximation of the laws of the member states relating to
electromagnetic compatibility according to RL2004/1081EG and European Low
Voltage Directive RL2006/95/EG.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part IS of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the complying party may
cause the user to lose permission to operate the device. This device complies
with port 15 of the FCC Rules. Operation is subject to the following two
conditions: 1) This device may not cause harmful interference, and 2) This
device must accept any interference received, including interference that may
cause undesired operation.
FCC ID: WRAWPM-500TX
This symbol indicates that this product should not be disposed of with your household waste, according to the WEEE directive (2021/19/EU) and your national law. This product should be handed over to an authorized collection site for recycling waste electrical and electronic equipment (WEEE). Improper handling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with WEEE. At some time, your cooperation in the correct disposal of this product will contribute to the effective usage of natural resources. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, waste authority, or your household waste disposal service.
About This Manual
This manual contains up-to-date technical specifications as of printing.
However, specifications contained herein may not conform to your particular
product since Takstar is constantly improving its products. Also,
specifications, devices or accessories available may vary from region to
region. If you have any questions, please contact our local dealer. For the
latest version/more information, please visit our website:
https://www.tnkstar.com/
Guangdong Takstar Electronic Co., Ltd.
Address: No. 2 Fu Kang YiRd., Longxi Boluo
Huizhou, Guangdong 516121 China
Tel: 86 752 6383644
Fax: 86 752 6383952
Email: sales@takstar.com
Website: www.takstar.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>