TAKSTAR SM-8B-S Professional Recording Microphone User Manual
- June 3, 2024
- TAKSTAR
Table of Contents
SM-8B-S
Professional Recording Microphone
User Manual
SM-8B-S PROFESSIONAL RECORDING MICROPHONE
Preface
Dear Customer,
Thank you for purchasing Takstar SM-8B-S professional recording microphone.
Please read the user manual carefully before operation and keep it for
reference in future.
If you have any question or suggestion, please contact our local dealer.
Features
- High sensitivity, low self noise
- High-performance back electret condenser capsule
- Built-in transistor circuit, low self noise and stable performance
- Wide frequency response
Product content
Microphone …………………………………….. 1 pc
Microphone stand ………………………………………………. 1 Pc
Microphone windscreen ………………………………………….. 1 Pc
User Manual……………………………………………………….. 1 Pc
Application
Broadcast recording, personal recording, instrument recording, live performance
Specification
Frequency response graph
Transducer Principle: Back Electret Condenser
Directivity Characteristic: Unidirectional
Frequency Response: 20Hz-20KHz
Sensitivity: -33dB±3dB (0dB=1V/Pa at 1KHz)
Equivalent Noise Level: ≤22dB (IEC 581-5)
Max. Input SPL: 130dB (T. H. D ≤1% at 1KHz)
Output Impedance: 200Ω±30% (at 1KHz)
Power Requirement: 48V DC Phantom Power
Body Dimensions: Ø54mm x L148mm
Net Weight: 356g
Note: The above data are obtained by Takstar Laboratory and have the
right of final interpretation has the right of final interpretation.
Operation instruction
Installation and removal of the cable
- Insert the XLR plug into the microphone, rotate the plug so that the button on the top is aligned with the notch on the microphone, and then push the plug into the microphone until the button is positioned.
- When the cable is disconnected from the microphone, hold the plug while pressing the button, and then pull the plug out of the microphone.
Connecting the phantom power
Operating Instruction
- When using the microphone, you should turn down the volume of the amplifier or mixer, connect the phantom power supply to the microphone, turn on the power switch of the phantom power supply, and adjust the volume slowly from low to high so as not to impact the speaker.
- Cover the head of the microphone with your hand or bring the microphone close to the speaker, which may produce howling. In this case, you should first reduce the volume and increase the distance between the microphone and the speaker, and then try to make the microphone and speaker not face each other.
- The microphone is highly sensitive, so you must be careful not to drop it from a high place or give it a strong impact.
- The microphone should be stored in a dry and clean place when not in use. Avoid storing or using it in places with high temperature or humidity so as not to affect the sensitivity and timbre.
Cautions
In order to avoid possible personal injury or property damage caused by electric shock, high temperature, fire, radiation, explosion, mechanical hazards and improper use, please read and observe the following items carefully before using the product.
- When using the product, please confirm whether the power of the connected device matches the power of the product, and adjust the volume of the device. Do not use it for a long time when the power of the product is exceeded or at a high volume to avoid product failure and hearing damage.
- If there is any abnormality (such as smoke, odor, etc.) during use, please turn off the power switch and unplug the power plug immediately, and then send the product to the dealer for maintenance.
- If the product needs to use removable batteries, it is strictly forbidden to use batteries with damaged insulation materials. Please do not charge non-rechargeable batteries.
- Discarded batteries must be placed in designated classified garbage bins, and cannot be used as children’s toys or discarded directly to avoid potential safety hazards or environmental impact.
- The product and accessories should be placed indoors in a dry and ventilated place. Do not store them in a humid and dusty environment for a long time. Avoid getting close to fire, rain, water, excessive collision, throwing, vibrating the machine and covering the ventilation holes during use, so as not to damage its function.
- If the product needs to be fixed on the wall or ceiling, please make sure to fix it in place to prevent it from falling down.
- When using the product, you must abide by the relevant safety regulations. Please do not use the product in the occasions that are clearly prohibited by laws and regulations to avoid accidents.
- Please do not disassemble, refit or repair the product by yourself to prevent personal injury. If you have any questions or service needs, please contact our local dealer for follow-up.
About the meaning of icon
**** According to the test results of RL2004/108/EG and European Low Voltage
Directive RL2006/95/EG, the product complies with the limit specified in the
directives of the European Community on the integration of the laws of the
member states on electromagnetic com- patibility.
This symbol indicates that according to the WEEE Directive (2012 / 19 / EU)
and national laws, this product should not be disposed of together with your
household waste, and should be returned to an authorized recycling station of
electrical and electronic equipment (WEEE) for recycling, because this type of
waste has potential harmful substances that may have a negative impact on the
environment and human health. Meanwhile, when this product is disposed of
properly, it is conducive to the effective use of natural resources. For more
information on where you can place your waste recycling equipment, please
contact your local City Office, Waste Management Bureau or Household Waste
Treatment Service Department.
Scan for more product informationhttp://www.takstar.com/
400 6828 333
xs@takstar.com
www.takstar.com
0752 6383950
Guangdong Takstar Electronic Co., Ltd.
Address: No. 2 Fu KangYiRd., Longxi Boluo Huizhou, Guangdong 516121 China
Tel: 86 752 6383644 Fax: 86 752 6383952
Email: sales@takstar.com
Website: www.takstar.com
GB/T 14198-2012 9TSM8BSS3A
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>