CHORS Firefly ZS Dimmable Hanging Lamp Instruction Manual
- June 13, 2024
- CHORS
Table of Contents
CHORS Firefly ZS Dimmable Hanging Lamp
Product Information
- Model: Firefly ZS 26.9105.xxx.xxx
Electrical Specifications
- Input Voltage: 230V
- Frequency: 50Hz
- DC Output: 1 X DC 180 mA, Max. 60 VDC
- Manufacturer: CHORS
- Address: SOLTYSOWICKA 19C, 51-168 WROCLAW, POLAND
- Contact: T: +48 71 323 14 00-01, W: CHORS.PL
Product Usage Instructions
To use the Firefly ZS luminaire, please follow these steps
- Ensure that the input voltage supplied to the luminaire is 230V AC with a frequency of 50Hz.
- Connect the electrical wiring according to the provided electrical wiring diagrams.
- Make sure to adhere to the polarity markings indicated by the “+” and “-” symbols.
- The luminaire has a DC output of 1 X DC 180 mA. Do not exceed a maximum voltage of 60VDC.
If you have any further questions or need assistance, please refer to the manufacturer’s contact information provided above.
MODEL OPRAWY
MODEL OF THE LUMINAIRE
- Firefly ZS 26.9105.xxx.xxx
SCHEMATY WIRING DIAGRAMS
MAKS. 1 – SUNLIKE 26.91XX.6XX.XXX MAX.
- LIGHT SOURCE – SUNLIKE 230V 50Hz
Firefly ZS
CHORS
- SOŁTYSOWICKA 19C
- 51-168 WROCŁAW
- POLAND T: +48 71 323 14 00-01
- W : CHORS.PL
ASSEMBLY INSTRUCTIONS
- Turn off the power.
- Connect the 180mA DC power supply located at the base of the SNAP.
- Attach the lampshade to the housing by turning it to the first stop.
- Turn on the power.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>