essie IN10-E005 Electric Mosquito Killer User Guide
- June 9, 2024
- essie
Table of Contents
essie IN10-E005 Electric Mosquito Killer
Introduction for Electronic Mosquito Killer
Dear users,
Thank you for purchasing this Electronic Mosquito Killer. This product is a
highly developed anti-mosquito product. It attracts light sensitive flying
insects with its high intensity ultraviolet light. As flying fly toward to the
light, they pass through a patented vertical rod killing grid and are
destroyed cleanly and efficiently without the use of chemical fogs or Sprays.
IMPORTANT SAFETY INSTRUCTIONS
- Do not place the unit on the ground or near gas, oil or other inflammable materials.
- Clean the dead flying frequently.
- Never place fingers or hands, or inserts any objects into the unit while it is connected to an electrical outlet.
- Do not cover the Electronic Mosquito Killer with cloth or paper while connecting with power.
- Please disconnect plug before servicing, cleaning and when not in use.
- Do not clean with the water spray or the like.
- Indoor and outdoor use. Store indoors when not in use. Please keep it out of reach of children.
- Do not abuse power cord. Keep power cord from heat, oil and sharp edges.
- Appropriate extension cords and devices to connect the Electronic Mosquito Killer are required if the Electronic Mosquito Killer is far away from the electrical outlet. For your safety, please use UL/ETL certificated extension cord to connect vwith Electronic Mosquito Killer and keep the extension cord connections dry and off the ground.
- Do not connect or cut off power with wet hand.
Installation
- Unpack the Mosquito Killer. Save the carton and use it for storage during off-season months.
- If you want to mount the Mosquito Killer, choose a sturdy mounting device from which to hang the unit. If permanent installation is required, check your local electrical cords and see a professional electrician.
- If you wouldn’t like mount the unit, the handle on the Mosquito Killer is convenient to carry and place anywhere.
- Hang or place the Mosquito Killer at a height of 20-50 cm/ 8-20 inches above the ground and use it in a dark environment.
- Plug cord into receptacle or a compatible extension cord. Light will on.
Maintenance
Cleaning: This Mosquito Killer requires no special maintenance other than cleaning bugs debris from grid and twist off the bottom to clean the unit. This should be done frequently. Be sure to unplug the unit before cleaning. Do not clean it with water spray or the like.
Add extra lures, baits, or attractants
It would be better to combine the lures, baits, or attractants with this Mosquito Killer. Your Mosquito Killer uses an exclusive slow-release Attractant which will increase the effectiveness of luring mosquitoes and biting flies into its killing grid.
-
Installation:
Put the lures, baits, or attractants at the bottom of unit. You can rotate twist off the bottom, and place the lures, baits, or attractants on it. -
Operation:
When your Mosquito Killer is on, it will provide the heat and convective air flow to vaporize the lure and disperse it at the proper rate per hour for maximum effectiveness. For best results replace the lures, baits, or attractants 30 days. -
Attention:
Always wash your hands thoroughly after contact Please keep it away from children.
Technical Parameters
Product Specifications
- Model No.: IN10-EO05
- Watt: 15W
- Fluorescent lamp type: E27 2U 15W
- Input: AC220V-24OV/ 50Hz
- Electric Grid Voltage: 2600V
After-sales Service
If you have any questions about this product, please feel free to contact us and we will solve it within 12 hours after receiving your questions.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>