CHORS Maxime R IN Recessed LED Light Instruction Manual
- June 12, 2024
- CHORS
Table of Contents
CHORS Maxime R IN Recessed LED Light
Product Information
- Product Name: Maxime R IN 48.3114.xxx.xxx
- Electrical Wiring Diagrams: Schematy Podłaczenia Elektrycznych
- Light Source: 1 x DC 350/700 mA, 230V 50Hz
- Max. Output: 3 x DC 350/700 mA, Max. 60 VDC
- Manufacturer: CHORS
- Address: Soltysowicka 19C, 51-168 Wroclaw, Poland
- Contact: T: +48 71 323 14 00-01, W: CHORS.PL
Product Usage Instructions
- Make sure the product is connected to a power source of 230V with a frequency of 50Hz.
- Refer to the electrical wiring diagrams for proper installation and connection.
- Ensure that the light source is connected to the product using a DC power supply of 350/700 mA.
- The maximum output of the product is 3 x DC 350/700 mA with a maximum voltage of 60 VDC.
- Position the product in the desired location and secure it properly.
- Connect the necessary wires and ensure proper polarity (+/-) for correct functionality.
- Refer to the user manual for any additional instructions or troubleshooting information.
MOUNTING HOLES
Maxime R IN 48.3114.xxx.xxx
ELECTRICAL WIRING DIAGRAMS
- 1 LIGHT SOURCE
- MAX. 3 LIGHT SOURCES
- MAX. 1 LIGHT SOURCE – SUNLIKE
ASSEMBLY INSTRUCTIONS
- Turn off the power.
- Cut the mounting hole (dimensions of mounting).
- Connect a 350 or 700mA DC power supply depending on the light source (LED/SUNLIKE) (electrical wiring diagrams on the other side of the page).
- Lift the springs.
- Insert the lamp into the mounting hole. The springs will return to the original position and press the lamp against the ceiling, holding it.
- Turn on the power.
SOŁTYSOWICKA 19C | 51-168 WROCŁAW | POLAND
T: +48 71 323 14 00-01
W: CHORS.PL
References
Read User Manual Online (PDF format)
Loading......