BTEK Monorail Scale Instruction Manual

Table of Contents

BTEK Monorail Scale-fig1

Please call a BTEK authorized service provider for service or repairs.• Ensure that the area used for this equipment, is safe for this equipment.
Allow only qualified personnel to work on electric / electronic components.
Do not use this equipment for anything other than its intended use.
Ensure equipment is plugged into stable power sources.
Keep equipment away from high voltage, vibration, and high draft areas.
Keep equipment cords and cables secured and protected.
Perform periodic inspections to keep equipment in good working order.
Never apply a load over the capacity of your scale.
Keep the area around your scale free of debris.

SAFETY WARNING

Always unplug or remove power source from equipment before cleaning with water unless it has been installed by professionals that determine otherwise.
After cleaning is done always ensure equipment is completely dry before returning to or plugging into power source unless it has been installed by professionals that determine otherwise.

The information provided in this manual is a guide on installing the B-TEK, LLC. Monorail series scale. This document is intended as a guide only, the actual installation should only be performed by qualified personnel.
All sales of goods are subject to the standard warranty and the standard terms and conditions published by B-TEK, LLC.
Should you have any questions regarding the B-TEK Monorail scale, contact your local B-TEK, LLC. scale representative.
Available sizes 48”.
The Weigh Rail can be used in animal weighing or wide materials applications.
Rail height is 2.5”
Available capacities 1000lb, 2000lb and 2500lb.
Structure 304 stainless steel.
IP67 Stainless steel shear beam load cells.

BTEK Monorail Scale-fig2

BTEK Monorail Scale-fig3

The above diagram covers BTEK indicators cables and summing boards that are or can be used with the monorail scale.
If an indicator outside the ones listed in the above diagram is being used, use the supplied manual for that indicator to get the correct terminal wiring specs.

BTEK Monorail Scale-fig4

NOTES:

The BTEK Monorail Scale should be installed by a professional. It is important to ensure that when installed, the unit is structurally sound, it is advised to consult with building maintenance and or structural engineers to ensure proper installation to rails and ceiling structure. The monorail should be installed as level as possible.
It is also recommended that the monorail be installed on straight rails and not on a turn or curve.