CHORS Firefly K Wall Mounted LED Instruction Manual
- June 13, 2024
- CHORS
Table of Contents
Firefly K Wall Mounted LED
Instruction Manual
ASSEMBLY INSTRUCTIONS
- • Turn off the power.
- • With screws (A) and wall plugs, attach the mounting plate to the wall (mounting holes scheme on the other side of the page).
- • Connect the power supply. Remember to ground (electrical wiring diagrams on the other side of the page).
- • Put the luminaire on the mounting plate. Adjust the appropriate setting and tighten the springs.
- • Attach gently the lampshade to the housing by turning it to the first stop.
- • Turn on the power.
• The enclosed tool kit is designed for solid materials (solid brick, wood, concrete, aerated concrete) and gypsum board surfaces. The dowel should be properly matched to the mounting surface. Proper use of the dowel affects the safety and strength of the structure.
TOOLS
MOUNTING HOLES
ELECTRICAL WIRING DIAGRAMS
SOŁTYSOWICKA 19C
51-168 WROCŁAW
POLAND
T: +48 71 323 14 00-01
W: CHORS.PL
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>