CHORS Myco K LED Wall Sconce Instruction Manual
- June 12, 2024
- CHORS
Table of Contents
CHORS Myco K LED Wall Sconce
MOUNTING HOLES
ELECTRICAL WIRING DIAGRAMS
TOOLS
ASSEMBLY INSTRUCTIONS
- Turn off the power
- Attach the profile to the wall with screws (A) and dowels (mounting holes scheme on the other side of the page).
- Connect the 230V power to the driver. Remember to ground (electrical wiring diagrams on the other side of the page).
- Place the lid on the mounting element.
- Screw on the luminaire using the decorative nut.
- Turn on the power
- The enclosed tool kit is designed for solid materials (solid brick, wood, concrete, aerated concrete) and gypsum board surfaces. The dowel should be properly matched to the mounting surface. Proper use of the dowel aects the safety and strength of the structure.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>