CHORS Thiny Snake Z Surface Mounted Light Instruction Manual
- June 13, 2024
- CHORS
Table of Contents
CHORS Thiny Snake Z Surface Mounted Light
MOUNTING HOLES
Thiny Snake Z 60 22.4111.xxx.xxx
W | X | Y | Z |
---|---|---|---|
271 mm | 273 mm | 16 mm | 50 mm |
Thiny Snake Z 90 22.4112.xxx.xxx
W | X | Y | Z |
---|---|---|---|
271 mm | 573 mm | 16 mm | 50 mm |
Thiny Snake Z 120 22.4113.xxx.xxx
W | X | Y | Z |
---|---|---|---|
571 mm | 573 mm | 16 mm | 50 mm |
Thiny Snake Z 150 22.4114.xxx.xxx
W | X | Y | Z |
---|---|---|---|
771 mm | 573 mm | 16 mm | 50 mm |
ELECTRICAL WIRING DIAGRAMS
ON/OFF 22.41XX.JXX.XXX
DALI 22.41XX.TXX.XXX
ASSEMBLY INSTRUCTIONS
- Turn off the power.
- Use the screws (A) and dowels to fix the mounting box and the hanger shafts to the ceiling (mounting holes scheme and the spacing of slings on the other side of the page).
- Adjust the length of the steel cables and lock them in the hanger body. Then drag the cables through the holes in the rollers. Screw the hanger body into the roller. Cut the excess of the cable.
- Adjust the length of the wire and lock it with the stopper. You can store the excess in the can of the lamp or cut it off.
- Connect the 230 V power supply to the driver. Remember to ground (electrical wiring diagrams on the other side of the).
- Turn on the power
The enclosed tool kit is designed for solid materials (solid brick, wood, concrete, aerated concrete) and gypsum board surfaces. The dowel should be properly matched to the mounting surface. Proper use of the dowel affects the safety and strength of the structure.
TOOLS
Customer Support
SOŁTYSOWICKA 19C | 51-168 WROCŁAW | POLAND
T: +48 71 323 14 00-01 | W: CHORS.PL
References
Read User Manual Online (PDF format)
Loading......