CHORS Luno ON Surface Mounted Ceiling Light Instruction Manual

Luno ON Surface Mounted Ceiling Light
Instruction Manual

ASSEMBLY INSTRUCTIONS

1. Turn off the power.
2. Use the screws (A) and expansion anchors to fix the mounting holder to the ceiling (mounting holes scheme on the other side of the page).
3. Connect the 230V power to the driver. Remember to ground (electrical wiring diagrams on the other side of the page).
4. Connect the connector.
5. Place the LED plate in the mounting holder.
6. Put on a lampshade.
7. Turn on the power.

• NOTE: Before fitting the mounting bracket, remove it from the luminaire.

  • The enclosed tool kit is designed for solid materials (solid brick, wood, concrete, aerated concrete) and gypsum board surfaces. The dowel should be properly matched to the mounting surface. Proper use of the dowel affects the safety and strength of the structure.

TOOLS

MOUNTING HOLES

Accent ON 30 41.1101.xxx.xxx
Accent ON 30 41.1101.xxx.xxx
Luno 136 ON 14.1101.xxx.xxx
Luno 136I ON 14.1102.xxx.xxx
Luno 136II ON 14.1103.xxx.xxxAccent ON 150 41.1105.xxx.xxx
Accent ON 150 41.1105.xxx.xxx
Luno 160 ON 14.1104.xxx.xxx
Luno 160I ON 14.1105.xxx.xxx
Luno 160II ON 14.1106.xxx.xxx

ELECTRICAL WIRING DIAGRAMS

SOŁTYSOWICKA 19C
51-168 WROCŁAW
POLAND
T: +48 71 323 14 00-01
W: CHORS.PL

References

• Strona główna - Chors

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>