CHORS Moonlight Z Modern Lighting Instruction Manual
- June 12, 2024
- CHORS
Table of Contents
CHORS Moonlight Z Modern Lighting
Product Information: Product Name: LED Power Supply Model: TRIAC
34.41XX.AXX.XXX Manufacturer: Moonlight Z Address: CHORS SOLTYSOWICKA 19C,
51-168 WROCLAW, POLAND Phone: +48 71 323 14 00-01 Website: CHORS.PL Product
Usage Instructions: Power Supply Connection: Connect the N (Neutral) wire to
the N terminal on the LED power supply. Connect the L (Line) wire to the L
terminal on
the LED power supply. Make sure the power supply is connected to a 230V, 50Hz
electrical source.
Wiring Diagram: Refer to the electrical wiring diagrams provided in the
user manual or scheme for proper connection and installation. Output
Connection: Connect the positive (+) wire of the LED light to the A terminal
on the LED power supply. Connect the negative (-) wire of the LED light to the
A terminal on the LED power supply. Voltage and Frequency: The LED power
supply operates with a voltage of 230V and a frequency of 50 Hz.
Note : Please consult the user manual or contact Moonlight Z for any
additional information or troubleshooting assistance.
MOUNTING HOLES
ELECTRICAL WIRING DIAGRAMS
ASSEMBLY INSTRUCTIONS
- Turn off the power
- Use the screws (A) and dowels to fix the mounting plate to the ceiling (mounting holes scheme on the other side of the page).
- Adjust the length of the wire and lock it with the end stop. You can store the excess in the box or cut the lamp
- Connect the 230V power supply according to the diagram. Parting lines can be bridged. Remember to ground (electrical wiring diagrams on the other side of the page).
- Place the main part of the luminaire on the mounting plate and screw it on using the nut.
- Turn on the power.
- The enclosed tool kit is designed for solid materials (solid brick, wood, concrete, aerated concrete) and gypsum board surfaces.
- The dowel should be properly matched to the mounting surface. Proper use of the dowel affects the safety and strength of the structure.