2C-SC11-1D 1D Wired Barcode Scanner

1D Wired Barcode Scanner

The 1D Wired Barcode Scanner is a device used to scan and decode
barcodes. It supports various barcode types and has multiple
settings that can be customized according to the user’s needs.

Table of Contents

• Restore Defaults
• Trigger Mode
• Buzzer Setup
• End Mark
• Capital & Lowercase Setup
• Reverse Code Reading(black background)
• Barcode Types
• Language Setup
• Add Prefix/Suffix
• Barcode Table
• Frequently Asked Questions

Product Usage Instructions

Restore Defaults

The device can be restored back to its default factory settings
by scanning the “Restore Defaults” barcode in the manual.

Trigger Mode

The device has two trigger modes, continuous mode or key
trigger. To switch between modes, scan the corresponding barcode in
the manual.

Buzzer Setup

The device can be set to produce a sound when a barcode is
scanned. The sound volume and type can be adjusted by scanning the
corresponding barcode in the manual.

End Mark

An end mark can be added to the end of a scanned barcode to
indicate the end of the code. The type of end mark can be adjusted
or turned off by scanning the corresponding barcode in the
manual.

Capital & Lowercase Setup

The device can be set to swap capital and lowercase letters or
change all letters to uppercase or lowercase. The settings can be
adjusted by scanning the corresponding barcode in the manual.

Reverse Code Reading(black background)

The device can read barcodes that are printed on a black
background by reversing the code reading. This setting can be
turned on or off by scanning the corresponding barcode in the
manual.

Barcode Types

The device supports various barcode types including UPCA, UPCE,
EAN8, EAN13, ISBN, ISSN, CODE 39, CODE 32, CODE 128, CODE 93, CODE
11, CODABAR, Industrial 2 of 5, Interleaved 2 of 5, MSI, GS1
Omnidirectional, GS1 Limited and Febran. The settings and options
for each barcode type can be adjusted by scanning the corresponding
barcode in the manual.

Language Setup

The device supports multiple languages which can be selected by
scanning the corresponding barcode in the manual.

Add Prefix/Suffix

A prefix or suffix can be added to the beginning or end of a
scanned barcode respectively. The prefix or suffix can be set by
scanning the corresponding barcode in the manual.

Barcode Table

A table of barcodes and their corresponding settings is provided
in the manual for reference.

Frequently Asked Questions

A list of frequently asked questions and their answers is
provided in the manual.

1D Wired Barcode Scanner
Manual Guide

Table of contents

Restore Defaults

1

Trigger Mode

1

Buzzer Setup

1

End Mark

1

Capital & Lowercase Setup

1

Reverse Code Reading(black background)

1

UPCA

2

UPCE

2

EAN8

2

EAN13

3

ISBN

3

ISSN

3

CODE 39

4

CODE 32

4

CODE 128

4

CODE 93

4

CODE 11

5

CODABAR

5

Industrial 2 of 5

5

Interleaved 2 of 5

5

MSI

6

GS1 Omnidirectional

6

GS1 Limited

6

Febran

6

Language Setup

6

Add Prefix/Suffix

8

Hide characters

8

Barcode Table

9

Frequently ask question

13

Restore Defaults Trigger Mode

Continuous Mode

Buzzer Setup

Keys Trigger(*default)

Volume-ON*

End Mark

Volume-OFF

CR

None

TAB

LF+CR

Capital & Lowercase Setup

Swap Capital/Lowercase

No Swap*

All Capital

All Lowercase

Reverse Code Reading(black background)

White in black background-ON

White in black background-OFF*

UPCA

UPCA-ON

UPCA-OFF

UPCA Check Digit-ON

UPCA Check Digit-OFF

UPCA System Digit-ON

UPCA System Digit-OFF

UPCA to EAN13 -ON

UPCE

UPCA to EAN13 -OFF

UPCE-ON

UPCE-OFF

UPCE Check Digit-ON

UPCE Check Digit-OFF

UPCE System Digit-ON UPCE to UPCA-OFF

UPCE System Digit-OFF

EAN8

UPCE to UPCA-ON

EAN8-ON EAN8 Check Digit-ON

EAN8-OFF EAN8 Check Digit-OFF

EAN8 System Digit-ON

EAN13

EAN8 System Digit-OFF

EAN13-ON EAN13 Check Digit-ON

ISBN

EAN13-OFF EAN13 Check Digit-OFF

EAN13 to ISBN-ON*

ISSN

EAN13 to ISBN-OFF

EAN13 to ISSN-ON*

EAN13 to ISSN-OFF

UPC/EAN Extra Code

2 Extra Code

5 Extra Code

2 or 5 Extra Code

CODE 39

Extra Code-OFF

CODE39-ON*

CODE39-OFF

Transmit Check Character Verification

Do Not Transmit Check Character Verification

CODE39 MOD43-OFF

CODE39 MOD43-ON

Output Start&End Digit-ON

Output Start&End Digit-OFF

Full ASCII-OFF

CODE 32

Full ASCII-ON

CODE32-ON

CODE 128

CODE32-OFF*

CODE128-ON*

CODE128-OFF

CODE128 Check Digit-ON

CODE128 Check Digit-OFF*

CODE 93

CODE93-ON*
Transmit Check Character After Verification

CODE93-OFF
Do Not Transmit Check Character After Verification

CODE93 MOD47-OFF

CODE 11

CODE93 MOD47-ON

CODE11-ON

CODE11-OFF

One Check Bit-ON CODABAR-ON*

CODABAR

Two Check Bit-ON CODABAR-OFF

Output Start&End Digit-On

Output Start&End Digit-OFF

Industrial 2 of 5

Industrial 2 of 5-ON*

Interleaved 2 of 5

Industrial 2 of 5-OFF

Interleaved 2 of 5-ON

Interleaved 2 of 5-OFF

Interleaved Check 2 of 5-ON

Interleaved Check 2 of 5-OFF

Transmit Check Character After Verification

Do Not Transmit Check Character After Verification
MSI

MSI-ON

GS1 Omnidirectional

MSI-OFF*

GS1 Omnidirectional-ON

GS1 Omnidirectional-OFF

GS1 Limited

GS1 Limited-ON

Febran

GS1 Limited-OFF

Febran-ON

Language Setup

Febran-OFF*

UNITED STATES(English)

CANADA (French)

NETHERLANDS (Dutch)

SPAIN (Spanish-International)

ARGENTINA (Latin American)

BRAZIL (Portuguese)

DENMARK (Danish) ITALY (Italian 142) GERMANY (German) SWEDEN, FINLAND (Swedish, Finnish) PORTUGAL (Portuguese) BELGIUM (Dutch)
TURKISH-Q POLAND (Polish 214) HUNGARY (Hungarian)

UNITED KINGDOM (English) FRANCE (French)
NORWAY (Northern Sami) SLOVAKIA (Slovak)
CZECH REPUBLIC (Czech) SWITZERLAND (German, French) TURKISH-F CROATIA (Croatian) JAPAN (Japanese)

Add Prefix/Suffix

Add Prefix

Add Suffix

Cancel Prefix

Cancel Suffix

Save settings
E.g. If you want to add X and Y before the barcodePlease scan the following code in order: “Add Prefix “Barcode Table”X”Barcode Table”Y””Save settings”
Hide characters

Hide the front characters

Hide the behind characters

E.g. If you want to hide the first two characters of the barcode , Please scan the

following code in order:

“Hide the front characters”Barcode Table”0″Barcode Table”2″

Barcode Table

SOH EOT BEL LF CR DLE DC3 SYN EM FS US

STX ENQ Backspace VT SO DC1 DC4 ETB SUB GS SPACE

ETX ACK TAB
FF SI DC2 NAK CAN ESC RS
!

”

$

%

&

`

(

)

,

–

.

/

0

1

2

3

4

5

6

7

8

9

:

;

<

=

?

@

A

B

C

D

E

F

G

H

I

J

K

L

M

N

O

P

Q

R

S

T

U

V

W

X

Y

Z

[

]

^

_

`

a

b

c

d

e

f

g

h

i

j

k

l

m

n

o

p

q

R

s

t

u

v

w

x

y

z

{

|

}

~

Delete

F1

F2

F3

F4

F5

F6 F9 F12 Page up Page down Down arrow

F7 F10 INSERT Delete Right arrow Up arrow

F8 F11 HOME END Left arrow

Frequently ask question
The bar codes in the user manual are for programming , please dont scan them arbitrarily when no need , otherwise may affect the normal use of the product .
Please try to scan “Restore defaults “bar code in the user manual for a try if the scanner cannot use normally ; if problem still not resolve , please try following methods . Problem 1: the scanner doesn’t have electricity to start on. Reason: 1. the cable interface loosed , please fixed connection interface. 2. the computer front USB port power supply shortage , please replace the computer interface or change another to try. 3. used the incorrect cables , please use the origina cable which the factory is equipped with 4. cable fault , please send back to the factory repair.
Problem 2 : the scanner has laser , but can’t read the barcode. Reason : 1. barcode has flawed , and try to scan the same type barcodes for testing again . 2. the scanning mode is not correct , scanning laser need to completely cover the barcode , if still can’t read , please adjust the scanning distance and Angle , the scanner can’t read the barcode at 90 “angle . 3. the scanner did not open the corresponding code system , it has to scan the barcode after open the corresponding code system.
Problem 3 : the scanner has laser and it can read barcode , but can’t upload the data Reason : 1. The scanner has set up the incorrect output mode , please set the correct output mode refer to the manual. 2. the cable transmission failure , please replace the cable.
Problem 4: the scanner has laser and it can read barcode . but It uploads the wrong decoding barcode. Reason : the keyboard layout of the scanner is different with the country you used , please use the scanner to read the keyboard settings on the manual. If you have any question or concern about the operation of the scanner, please contact us!

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>