CHORS Myco One Z Ceiling Pendant Light Instruction Manual

June 12, 2024
CHORS

Myco One Z Ceiling Pendant Light
Instruction ManualCHORS Myco One Z Ceiling Pendant
Light

ASSEMBLY INSTRUCTIONS

  1. Turn off the power.
  2. Attach the mounting bracket to the ceiling with screws (A) and dowels (mounting holes scheme on the other side of the page).
  3. Adjust the length of the wire and lock it with the end stop. You can store the excess in the box or cut of the lamp.
  4. Connect the 230V power to the driver. Remember to ground (electrical wiring diagrams on the other side of the page).
  5. Place the housing on the mounting plate and tighten with the decorative nut (B).
  6. Turn on the power.
  • The enclosed tool kit is designed for solid materials (solid brick, wood, concrete, aerated concrete) and gypsum board surfaces. The dowel should be properly matched to the mounting surface. Proper use of the dowel affects the safety and strength of the structure.

TOOLS

CHORS Myco One Z Ceiling Pendant Light - fig 2

MOUNTING HOLES

CHORS Myco One Z Ceiling Pendant Light - fig 3Myco One 120 Z 31.4113.xxx.xxx
Myco One 160 Z 31.4114.xxx.xxx
Myco One 300 Z 31.4115.xxx.xxx

ELECTRICAL WIRING DIAGRAMS

CHORS Myco One Z Ceiling Pendant Light - fig 4

SOŁTYSOWICKA 19C
51-168 WROCŁAW
POLAND
T: +48 71 323 14 00-01
W: CHORS.PL

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals