CHORS Moi R K Wall Mounted Lamp Instruction Manual
- June 12, 2024
- CHORS
Table of Contents
CHORS Moi R K Wall Mounted Lamp
Product Information
- Product Model: Moi R K 15.2114.xxx.xxx
- Product Type: LED Power Supply
- Manufacturer: CHORS
- Manufacturer Address: SOLTYSOWICKA 19C, 51-168 WROCLAW, POLAND
- Contact Number: +48 71 323 14 00-01
Product Usage Instructions
- Ensure that the input voltage is within the specified range of ~230V at 50Hz.
- Connect the electrical wiring according to the provided electrical wiring diagrams.
- Make sure to provide a minimum clearance of 60mm around the product for proper ventilation
- Connect the LED load to the output terminals marked as A.
- Double-check all connections and ensure they are secure.
MOUNTING HOLES
Moi R K 15.2114.xxx.xxx
ELECTRICAL WIRING DIAGRAMS
- Turn off the power
- Fasten the mounting ring to the wall or ceiling with screws (A) and wall plugs (mounting holes scheme on the other side of the page).
- Connect the 230V power to the power supply. Remember to ground. IMPORTANT! The cable should be at least 6 cm long.
- Mount the lamp with the mounting ring, adjust the fixture to the desired angle and tighten the nut to lock the fixture.
- Loosening the nut and re-tightening it allows you to position and lock the fixture in case you want to change the direction of light.
- Loosening the nut and re-tightening it allows you to position and lock the fixture in case you want to change the direction of light.
- Turn on the power.
The enclosed tool kit is designed for solid materials (solid brick, wood, concrete, aerated concrete) and gypsum board surfaces. The dowel should be properly matched to the mounting surface. Proper use of the dowel affects the safety and strength of the structure.
TOOLS
References
Read User Manual Online (PDF format)
Loading......