CHORS Myco ON LED Spotlight Instruction Manual
- June 12, 2024
- CHORS
Table of Contents
Myco ON LED Spotlight
Instruction Manual
ASSEMBLY INSTRUCTIONS
- Turn off the power.
- Attach the mounting bracket to the ceiling with screws (A) and dowels (mounting holes scheme on the other side of the page).
- Connect the 230V power to the driver. remember to ground (electrical wiring diagrams on the other side of the page).
- Mount the lamp with the mounting ring by tightening the screws (B).
- Turn on the power.
- The enclosed tool kit is designed for solid materials (solid brick, wood, concrete, aerated concrete) and gypsum board surfaces. The dowel should be properly matched to the mounting surface. Proper use of the dowel affects the safety and strength of the structure.
TOOLS
MOUNTING HOLES
Myco 120 ON
31.6104.xxx.xxx
Myco 160 ON 31.6105.xxx.xxx
Myco 300 ON 31.6106.xxx.xxx
ELECTRICAL WIRING DIAGRAMS
SOŁTYSOWICKA 19C
51-168 WROCŁAW
POLAND
T: +48 71 323 14 00-01
W: CHORS.PL
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>