KENDAL LIGHTING VF8300-8L Bathroom Lighting Waterford Instructions
- June 13, 2024
- KENDAL LIGHTING
Table of Contents
KENDAL LIGHTING VF8300-8L Bathroom Lighting Waterford
Product Information
Product Model : VF8300-8L
Safety Instructions:
- CAUTION: All electrical connections should be done by a qualified electrician.
- Always disconnect power at circuit breaker or unplug from wall outlet before servicing.
Package Contents:
- Mounting bracket (1)
- Screws (4)
- Anchors (4)
Recommended Dimmers:
- Lutron SCL-153P
- Lutron GTCL-150
- Lutron DV6039
- Lutron TGCL-153P
- Lutron DVCL-153P
- Or other compatible LED dimmer controls
Maximum Wattage:
Wattage should not exceed 150 watts of product for a 600 watt dimmer.
Product Usage Instructions
- Attach the mounting bracket to the junction box using the provided screws.
- Connect the ground wire from the junction box to the ground (or green) wire from the fixture using a wire nut.
- Connect the neutral wire from the junction box to the neutral (white) wire from the fixture using a wire nut.
- Connect the line wire from the junction box to the line (black) wire from the fixture using a wire nut.
- Attach the fixture to the mounting plate using the provided screws.
Note: This fixture is designed to dim with a standard Triac forward phase dimmer. The dimming levels will vary depending on the dimmer used.
Safety Instructions
- CAUTION: All electrical connections should be done by a qualified electrician.
- Follow and save these instructions.
- Always disconnect power at circuit breaker or unplug from wall outlet before servicing.
Assembly Instructions
Unpack your fixture, you should have the following items:
- A. Mounting bracket
- B Fixture
Parts bag
- Wire nuts 3pcs
- Junction box screws 2pcs
- Screws 4pcs& Anchors 4pcs.
-
Attach the mounting bracket to junction box with screws provided.
-
Connect the GROUND WIRE from junction box to GROUND (or GREEN) wire from fixture with a wire nut. Connect the NEUTRAL WIRE from junction box to NEUTRAL (WHITE) wire from fixture with a wire nut.Connect the LINE WIRE from junction box to LINE (BLACK) wire from fixture with a wire nut.
-
Attach the fixture to the mounting plate with screws provided.
-
This fixture is designed to dim with a standard Triac forward phase dimmer. Dimming levels will vary by dimmer.
-
Recommended dimmers:
- Lutron SCL-153P
- Lutron GTCL-150
- Lutron DV6039
- Lutron TGCL-153P
- Lutron DVCL-153P
-
Or other compatible LED dimmer controls
-
Wattage should not exceed 150 watts of product for a 600 watt dimmer.