tracer Rayder Steering Wheel Instruction Manual

tracer Rayder Steering Wheel

Summary

Thank you for purchasing 4IN1 wired wheel designed for PS3, PS4, PC and XBOX One con­soles, which is compatible with all of the PS4, PS3, PC and XBOX One games. With built-in motors, it can generate different vibration strength according to your status in the game (if the game software supports vibration function). The shape is designed according to the racing car wheels and in accordance with human ergonomics; you won’t feel tired easily even if you operate it for hours. It makes the game even more realistic, more maneuverability and more interesting.

Features

1. Compatible Windows XPNISTA/7/8/10
2. PS3/PS4/XBOXONE supports US,EU, Japan version console
3. Working status LED indicators Under PS3 playing
4.  Home button for setting on PS3/PS4/XBOX One console
5.  D-pad: UP/DOWN/RIGHT/LEFT and 45 degrees angle 8 analog direction pads
6.  Four buttons with relocation feature: R-wing(R2/8/RT), L-wing(L2/7/LB), brake pedal, ac­celerator pedal
7.  12 button input: X/2/A, 03/8, J:../4/Y, □/1/X, R1/6/RB, R2/8/RT, L1/5/LB, L2/7/LT, OPTIONS /10/Menu, SHARE/9Niew
8. 180 degrees rotation
9. Build-in deflection motor makes gaming more reality
10. LX Axis has three Stage Sensitivity optional for multi-demand
11. Spring loaded accelerating pedals provide a more realistic racing experience
12. When playing with PS4/XBOX ONE, need to connect to original PS4/XBOX One control­ler as a key to establish the connection

Button Table

Program Functions

Introduction

1.  Program source buttons: □/1/X, 0/3/B, 1:,,./4/Y, X/2/A, L 1/5/LB, L2/7/LT, R1/6/RB, R2/8/RT
2.  Programmable buttons: Left Wing (L2/7/LB), Right Wing (R2/8/RB), throttle (X//2/RT), Brake (D/1/LT)

Program setup

1.  Press SHARE/9Niew +OPTIONS/10/Menu button and hold for 3 seconds until the Orange LED is on,
2. Press the programmable button, and the Orange LED starts blinking,
3. Press program source button. The Red LED is solid light, program was done.

Clear single program

1. Press SHARE/9Niew +OPTIONS/10/Menu buttons and hold for 3 seconds until the Orange LED is on,
2.  Press programmed button and the Orange LED starts blinking,
3. Press programmed button again and the Red LED is on. Single programmed button is cleared.

Clear all programs

1. Press SHARE/9Niew +OPTIONS/10/Menu. Hold for 3 seconds until the Orange LED is on,
2. Press OPTIONS/10/Menu and hold for 4 seconds. Red LED solid light . All of the programmed buttons are cleared. Default is restored

Note: All of the settings will be cleared when the wheel is power off Program Pedals as Y axis

1. Press SHARE/9Niew +OPTIONS/10/Menu. Hold for 3 seconds until the Orange LED is on.
2. Press LEFT of the D-PAD. The RED LED is on. Pedals are programmed as Y function.

3 levels wheel sensitivity adjustment

1.  Press SHARE/9Niew +OPTIONS/10/Menu . Hold for 3 seconds until the Orange LED is on,
2.  Press SHARE/9Niew Buttons, to indicate current sensitivity status,
3.  Press SHARE/9/ View Buttons, to adjust sensitivity levels in this circulation as follows: Medium (Orange LED flash), High (Orange LED flash quickly), LOW (Orange LED Flash slowly)
4. Press UP, to enter sensitivity.

Pedal as analog function:
The harder you press the pedal, the bigger data and higher flashing frequency.

Platforms:
For use with PS3

1. Connect the wheel and gamepad to PS3 console; And connect the pedal to the wheel, Power on PS3 console.
2. The active channel LED indicator will light up when connection finished automatically.
3. Then you can set up or start the game
4. During PS3 game play, press the HOME button once to enter the XBM window; Press and hold the HOME button for 2 seconds to enter MENU setup window

For use with PS4

1. Connect the wheel and gamepad to PS4 console; And connect the pedal to the wheel, Power on PS4 console
2. Connect the racing wheel to original PS4 controller by a USB cable, consider the controller as a key to establish the connection between the controller and racing wheel( The controller need to be power off)
3.  After the connection been established, the RED LED is on, Press the Wheel HOME button, then you can start the game or the settings
4. During PS4 game play, press the HOME button once to enter the XBM window. Attention! To connect the P54 controller to the steering wheel, use a classic 4-core USB cable (not included), the two-core USB cable for powering portable devices is not suitable for use with the steering wheel.

For use with XBOX ONE

1. Connect the wheel to XBOX ONE console; And connect the pedal to the wheel, Power on XBOX ONE console
2.  Connect the racing wheel to original XBOX ONE controller by a USB cable, consider the controller as a key to establish the connection between the controller and racing wheel( The controller need to be power off)
3. After the connection been established, the RED LED on racing wheel is on, and LED indicator on the controller also is on. Then, you can start the game
4.  During XBOX ONE game play, press the HOME button to enter the main menu. Attention! To connect the XBOX ONE controller to the steering wheel, use a classic 4-core USB cable (not included), the two-core USB cable for powering portable devices is not suitable for use with the steering wheel.

For use with PC
X-INPUT

1.  As default mode when power on, red LED and 1st channel indicator light.
2. Press and hold HOME for 3sec. To switch to D-input, Red LED indicator blink 6times to turn solid lighting, The press HOME button for 3sec to switch to X-input mode.

D-input installation

1.  Start Windows and download the drivers from the website. Double click SETUP and follow on-screen instructions to complete the driver installation.
2. Connect the wheel to your PC: Start—> Control Panel —> Device and Printer, right click the device and printer –+ Game controller –+ Properties

Test

1. Enter Test interface to test buttons and axis functions
2.  Enter Calibration interface to calibrate the axis
3. Enter Vibration interface to test axis and pedals

Uninstall Driver

1. Start —-> Control Panel —-> programs/Function
2. Find the driver you want to remove in the Interface” current installed programs”. Click “Re­move” and follow the instructions to get successful uninstall.

Troubles Shooting

1. If the connection LED is not on, please connect to the controller again and check and con­troller is working.
2.  If the racing wheel do not have an reaction, and the console is stuck, please power off the console and power on again
3.  Please re-connect the racing wheel after incorrect operation during the game
4. Please power off the original controller before connect the racing wheel to PS4 or XBOX One console

Precautions

1.  Please read through and familiarize the manual before using this racing wheel
2.  Do not hit, drop or abuse it
3.  Do not disassemble, modify or try to repair by yourself
4.  Do not store it in place that is moist, hot or greasy
5.  Kids use it under adults’ guidance
6.  Please contact the retailer for more info.

The symbol of a crossed-out wheeled bin placed on electronic or electrical equipment, its packaging or accompanying documents means that the product may not be thrown out together with other waste. Used equipment may contain substances with toxic and carcinogenic properties, hazardous to human health and life, and poisoning the soil and groundwater. It is the user’s responsibility to hand over the used equipment to a designated collection point for its proper processing. For more information on recycling of electronic and electrical equipment, please contact your local authorities, waste disposal services and the place where you purchased this product. The household plays an important role in contributing to the reuse and recovery of secondary raw materials, including recycling, waste equipment. At this stage, attitudes are formed that affect the preservation of the common good, which is a clean natural environment.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>