MARKLYN 77983 24 Inch Floglo Starter Kit User Manual
- June 6, 2024
- MARKLYN
Table of Contents
77983 24 Inch Floglo Starter Kit
User Manual
-
product name: 24″ FLOGLO STARTER KIT
-
model:77983
-
Technical Data ：
Version: V1.0
Radio Frequency Band:
Antenna: PCB Antenna,
Rate voltage: DC 3.0V by battery -
Function description: 2.4G remote control Symphony, 5050 lamp beads RGB, with remote control
- There are 156 kinds of flow modes, including rainbow mode. (Press M+ and M- to select).
- There are 54 kinds of colors, (including fixed colors), (buttons C+ and C-
can be selected).
3), speed adjustment button (button S+ and S- can be selected), 5-level adjustment. - The key with the lock is the code matching key. Long press the code key to realize code clearing and code matching; after long-pressing for 3S, the receiver LED flashes red quickly (10HZ rate) five times, and then always lights red to indicate clear The code is successful (clear the code value of any remote control originally saved by the receiver); at this time, let go, any remote control can be the receiver; if you do not let go, press and hold to 5S, the receiver flashes green five times (10HZ rate) Light, and then a steady green light, indicating that the code is successfully paired (the receiver saves the code value of the transmitter). At this time, let go, only the remote control can control the receiver, and other remote controls cannot control the remote control.
- The right side of the key with the lock is the dimming key. The dimming is a 5-level adjustment. (All modes can be dimmed) 2425MHZ-2455MHZ
FCC regulatory conformance：
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment