HiFuture GRAVITY Portable Bluetooth Speaker User Guide
- June 16, 2024
- HiFuture
Table of Contents
- HiFuture GRAVITY Portable Bluetooth Speaker
- Product Information
- Product Usage Instructions
- FAQS
- Package List
- Diagram
- BLUETOOTH CONNECTING
- HOW TO USE
- BATTERY INDICATOR
- TWS Connection
- Restore factory settings
- Technical Specifications
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
HiFuture GRAVITY Portable Bluetooth Speaker
Product Information
- Specifications:
- Model: TWS/EQ
- Package List: TWS/ EQ earbuds, charging case, Type-C charging cable, user manual
- Buttons: Volume-/Previous track, Pause/Play, Volume+/Next track, Power Button/RGB Light
- Charging Port: Type-C
- Indicator Lights: Power/Bluetooth
Product Usage Instructions
- Step 1: Unboxing
- Open the package and check if it contains the following items:
- TWS/ EQ earbuds
- Charging case
- Type-C charging cable
- User manual
- Step 2: Charging the Earbuds
- Before using the earbuds, make sure they are fully charged:
- Connect the Type-C charging cable to the charging port (6) of the charging case.
- Connect the other end of the cable to a power source.
- The power indicator light (7) will turn on, indicating that the earbuds are being charged.
- Wait until the indicator light turns off, which indicates that the earbuds are fully charged.
- Step 3: Pairing with a Device
- To use the earbuds with your device via Bluetooth, follow these steps:
- Turn on the earbuds by pressing the Power Button/RGB Light (5) for 2 seconds.
- The Power/Bluetooth indicator light (7) will start blinking, indicating that the earbuds are in pairing mode.
- On your device, go to the Bluetooth settings and search for available devices.
- Select “TWS/EQ” from the list of available devices.
- Once connected, the Power/Bluetooth indicator light will stop blinking and remain solid.
- Step 4: Controlling Playback
- The earbuds have various buttons for controlling playback:
- Volume-/Previous track: Press this button to decrease the volume or go to the previous track.
- Pause/Play: Press this button to pause or resume playback.
- Volume+/Next track: Press this button to increase the volume or go to the next track.
FAQS
- Q1: How do I reset the earbuds?
- A1: To reset the earbuds, place them in the charging case and press and hold the Power Button/RGB Light (5) for 10 seconds until the indicator lights flash.
- Q2: How long does it take to fully charge the earbuds?
- A2: It takes approximately 2 hours to fully charge the earbuds.
- Q3: Can I use only one earbud at a time?
- A3: Yes, you can use either the left or right earbud independently by taking it out of the charging case and pairing it with your device.
Package List
Diagram
- TWS/ EQ
- Volume-/Previous track
- Pause/Play
- Volume+/Next track
- Power Button/RGB Light
- Type-C charging port
- Power/Bluetooth indicator light
- RGB light
- (With Speaker Power ON, single click the Power Button to Power ON/OFF RGB light)
BLUETOOTH CONNECTING
HOW TO USE
BATTERY INDICATOR
Switch Between 2 Bluetooth Devices
TWS Connection
TWS Connection (Twin Speakers Mode)
The indicator flashes blue before pairing Blue indicator is always ON after the BT connected
Restore factory settings
Reset the Gravity: With Gravity Powered ON, long press the ( ) for 7 seconds, and there will be a prompt sound, which means the Gravity has been reset successfully.
- You might need to Reset the Gravity if it’s not in the correct connection with your devices.
- After Resetting, delete the paired ” HiFuture Gravity” from your device and re-pairing it.
Technical Specifications
Type: | Portable Bluetooth Speaker | BT Chipset: | AC6966B8 |
---|---|---|---|
Amplifier & DSP: | ACM8625M | Audio Decode: | SBC/CVSD |
Preset EQ: | Dual EQ (General or Bass Boost) | Driver Type: | Dynamic |
Woofer+Tweeter
Bluetooth Version:| Bluetooth 5.3| Speaker diameter:| 3inch + 0.75inch
Support profile:| A2DP1.3/AVRCP1.6/HFP1.7| Speaker impedance:| 4ohms (±15%)
Speaker Frequency Response:| 50Hz-20KHz(±6dB)| Speaker rated power:|
130W+115W
Battery type:| Li-ion polymer battery 4000mAh| Rated power:| 45W
Battery lifetime:| Remain at 80% capacity after 300 cycles| SPL:| 83dB/1m/1W
Music playback time:| 8Hours| SNR:| >=80dB
Charge Voltage & Current:| DC5V@2A| THD+N:| <=1% (20W/1kHz)
Wireless Range:| 10m(Free space)| Standby time:| 300Days
Dimension(LWH):| 261.3117.08*116.3mm| Charging time:| 3.5hours
Water resistance:| IPX7| Charge port:| Type C
Manufacturer Warranty:| 1-Year Limited Warranty| Weight:| 1600g
Playtime testing based on HiFuture testing standard at 1/4 rated power with -13dB pink noise.
Gravity
-
Made by ShenZhen Future Access Technology Co.,Limited
-
Designed in the USA, Assembled in China
-
SHENZHEN FUTURE ACCESS TECHNOLOGY CO., LTD.
-
Explore more at www.hifuturegroup.com. All Rights Reserved
Please read this instruction carefully before using the product and keep it properly.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>