elna 7mm Edge Guide Foot Instructions
- May 15, 2024
- Elna
Table of Contents
EDGE GUIDE FOOT
Ref: 202-252-001
7mm Edge Guide Foot
The guide of this foot aligns edges/seams of fabric so that neatly parallel edge stitching and topstitching can be achieved with ease. Adjust the guide by turning the screw to match the edge/ seam precisely.
Caution
Turn the power switch off when attaching and detaching the foot.
Machine settings:
Stitch pattern: Straight stitch (Adjust the needle drop position as
necessary.)
Please refer to your machine’s instruction manual for presser foot attachment
and removal information.
To Sew:
Lower the needle at the starting point by turning the handwheel. Lower the
foot and turn the adjusting screw to align the guide with the fabric edge.
Sew while guiding the fabric edge along the guide.
The guide’s scale is marked in 1 mm units.
Elna International Corp. SA / 01.2024