COOPER Lighting Solutions IB519015EN 4ft LED Striplight Instructions
- June 13, 2024
- COOPER Lighting Solutions
Table of Contents
COOPER Lighting Solutions IB519015EN 4ft LED Striplight
Product Information
- Product Name: WNLED-WSNLED
- Brand: Cooper Lighting Solutions
- Model Number: IB519015EN
- Product Type: Light Fixture
- Manufacturer: Cooper Lighting Solutions
- Manufacturer Address: 1121 Highway 74 South Peachtree City, GA 30269
- Website: www.cooperlighting.com
Product Usage Instructions
- Remove the product from its packaging.
- To remove the lens, pull from one side of the fixture and hinge on the other.
- Remove the driver cover.
- Mount the fixture housing using the provided mounting holes on each end. Choose the appropriate hardware for surface or suspended mounting (supplied by others).
- Make electrical connections according to the applicable code.
- Install the channel cover.
- Install the lens on one side of the fixture and rotate it to engage the opposite side.
Important Notes:
- This product must be installed by a qualified electrician or a person familiar with the construction and operation of the product.
- Cooper Lighting Solutions assumes no responsibility for claims resulting from improper or careless installation or handling of this product.
- If you are not qualified, consult an electrician.
- Handle the product with care as the edges may cut.
- Specifications and dimensions are subject to change without notice.
Warranties and Limitation of Liability:
Please refer to www.cooperlighting.com for the terms and conditions of warranties and limitation of liability.
Trademark Information:
Cooper Lighting Solutions is a registered trademark. All trademarks are
property of their respective owners.
Installation Instructions
WARNING
Risk of fire, electrical shock, cuts and or other casualty hazards. This
product must be installed in accordance with the applicable installation code
by a qualified electrician or a person familiar with the construction and
operation of the product and the hazards involved. Cooper Lighting Solutions
assumes no responsibility for claims brought about by improper or careless
installation or handling of this product.
- Risk of Fire and Electric Shock. If not qualified, consult an electrician.
CAUTION
Edges May Cut. Handle with care.
- Risk of burn. Disconnect power and allow fixture to cool before changing bulb or handling fixture.
NOTICE: Green ground screw provided in proper location.
Do not relocate.
- Minimum 90° supply conductors.
NOTE: Specifications and dimensions subject to change without notice.
IMPORTANT: Read carefully before installing fixture. Retain for future reference.
ATTENTION Receiving Department: Note actual fixture description of any shortage or noticeable damage on delivery receipt. File claim for common carrier (LTL) directly with carrier. Claims for concealed damage must be filed within 15 days of delivery. All damaged material, complete with original packing must be retained.
INSTALLATION
- Remove product from packaging.
- Remove lens by pulling from one side of the fixture and hinge on the other (Figure 1).
- Remove driver cover (Figure 2).
- For mounting, using the provided mounting holes on each end of the fixture housing. Mount per required application (surface or suspended), Appropriate hardware should be used (supplied by others).
- Make electrical connections according to code.
- Install channel cover (Figure 3).
- Install lens on one side of the fixture and rotate to engage the opposite side (Figure 4).
Warranties and Limitation of Liability
Please refer to www.cooperlighting.com for
our terms and conditions.
Cooper Lighting Solutions
1121 Highway 74 South
Peachtree City, GA 30269
www.cooperlighting.com
© 2020 Cooper Lighting Solutions
All Rights Reserved
Printed in USA
Imprimé aux États-Unis
Impreso en los EE. UU.
Publication No. IB5190105EN
November 16, 2015
Cooper Lighting Solutions is a registered trademark.
All trademarks are property of their respective owners.