RYNOSKIN RS-FSS-017 Running Boards Owner’s Manual

June 13, 2024
RYNOSKIN

Rocker Step
PART NO. RS-FSS-017
FITS: 2021-Up Ford Bronco 2 Door

RS-FSS-017 Running Boards

| |
---|---|---
60-120 min| Cutting Not
Required| Drilling Not
Required

Torque & Tools

Fastener Size| Tightening Torque (ft-lbs)| Wrench Required| Allen Wrench Required
---|---|---|---
6mm| 7-8.5| | 10mm| | 4mm
8mm| 18-20| 13mm| 5mm
10mm| 35-40| 16mm| 6mm
12mm| 60-70| 18mm| 8mm

BEFORE INSTALLATION

REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT DEPEND ON THE PARTS LIST. READ INSTRUCTIONS CAREFULLY. BUMPER IS HEAVY, ASSISTANCE IS HIGHLY RECOMMENDED TO AVOID POSSIBLE INJURY OR DAMAGE TO THE VEHICLE.

Part List

RYNOSKIN RS FSS 017 Running Boards - Part List 2

RYNOSKIN RS FSS 017 Running Boards - Part List 2

PLEASE NOTE THAT THE FOLLOWING
PICTURES ARE BASED ON THE
PASSENGER SIDE INSTALLATION

STEP 1
Starting from underneath the Passenger/Right body panel, locate the front mounting location and the threaded holes in the body panel, (Fig 1).
Remove the plastic plugs covering the holes.
STEP 2
Select the Passenger/Right Front Mounting
Bracket. Attach the Mounting Bracket to the front location with (2) 10mm Hex Bolts, (2) 10mm Lock Washers and (2) 10mm Flat Washers, (Fig 2). Do not tighten hardware.

STEP 3
Repeat Steps 1-2 to attach (1) Passenger/Right
Rear Mounting Brackets to the rear locations, (Figs 3-4). Do not tighten hardware.

STEP 4
Select the Passenger/Right Rocker Step.
NOTE: The Passenger/Right Rocker Step will have a “17R” on the front. Carefully place Rocker Step on the brackets. Attach Rocker Step to the (2) Mounting Brackets with (4) 8mm Combo Bolts, (Fig 5). Do not tighten hardware.

STEP 6
Level and adjust the Rocker Step and fully tighten all hardware.

STEP 7
Repeat Steps 1—6 to attach the Driver/Left
Rocker Step.

STEP 8
Do periodic inspections to the installation to make sure that all hardware is secure and tight.

Attention
To protect your investment, do not use any type of polish or wax that may contain abrasives that could damage the finish.
Mild soap may be used also to clean the Running Boards.

www.rynoskinauto.com
Rev. 2/9/23 (JH)

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals