JesHome P1 Intelligent Visual Ear Pick Instructions
- June 5, 2024
- JesHome
Table of Contents
JesHome P1 Intelligent Visual Ear Pick
Scan the QR code to download APP
Hold the Power button to boot Open the APP and click
Add
Connect your phone to earpick WIFI Select “JesHome-P1-XXXX” and connect Back
to APP Click to start using
Product parameters
Product name:Intelligent visual ear pick Product Model: P1
- Battery Capacity: 130mA
- Charging Time: 45 minutes
- Use Time: 65 minutes
- Working Voltage: 3.7V~4.2V
- Input Voltage: 5V-1A
- Output Power: 0.5W
- Charging interface: Type-C
- Network Standard: IEEE 802.11b/g
- Operating Frequency: 2.4GHz
- Image Sensor: CMOS
- Lens Diameter: 3.5mm
- Image Transmission Pixel: 500W Image
- Transmission Rate: 30FPS
- Gravity Sensor: 3-axis smart gyroscope
- Product Size: ∮14mm
- H145mm Product Weight: 14.2g
Product accessories
- Main unit ※ 1
- Type-C charging cable ※ 1
- Instructions ※ 1
- Silicone Earpick Sleeve ※ 6
Cautions
- It is recommended to carefully clean the lens with cotton swab.
- Please observe the surroundings before use, do not use it in an environment where it may come into contact with moving people or animals, do not use it in a moving vehicle, or in other unstable environments. Please keep your body stable when using it.
- This product is not suitable for children under 3.
- To avoid accidental injury, children are prohibited from using this product alone.
- Do not place the machine in a humid environment for a long time, or immerse the whole machine in liquid.
- The product has built-in polymer battery, which must be charged once a month if not used frequently.
- Please charge the device with 5V charger. It is forbidden to use this device when it is under charging state.
- Avoid exposing the product to direct sunlight.
- Do not place heavy objects on top of the machine.
- During use, the temperature of the product will rise slightly (up to about 35°), which is normal
Troubleshooting
| Serial Number | Fault | Solution |
|---|---|---|
| 1 |
No response after startup
| Please charge with the provided charging cable.
The charging duration is 40 minutes
2| Camera indicator does not light up|
Shut down and restart or reconnect to WIFI
3| APP crashes| Uninstall the existing APPand rescan the QR code to install
the latest version of APP
4|
Silicone sleeve is loose
| Remove the silicone sleeve and slowly re-insert
the earpick, or replace the silicone sleeve
5| Blue indicator flashes quickly| Low battery, please charge the product
with the provided charging cable
6| Unstable connection, it is easy to disconnect or freeze when using| Restart
the earpick andreconnect to the APP
7|
After the product is connected to APP,
image cannot be displayed normally
| Disconnect the phone from the WiFi of the earpick,
restart the earpick, and reconnect to WiFi
If the above operation still fails to solve the problem, please contact our
customer
service staff, we will further provide you with practical
solutions.
Note: “○” means that the percentage content of this hazardous substance does not exceed the standard
Warranty
| S/N | Contact Information | Contact Content |
|---|---|---|
| 1 | User Name | |
| 1 | Telephone | |
| 1 |
Delivery address
|
1| Dealer|
1| Phone of Dealer|
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: this device may not cause harmful interference,
and this device must accept any interference received, including interference
that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.If this equipment does cause harmful interference to radio or
television reception,which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure condition without restriction
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>