iHealth View BP7S Wireless Blood Pressure Wrist Monitor User Manual

iHealth View BP7S Wireless Blood Pressure Wrist Monitor User Manual

MODEL: BP7S
QUICK START GUIDE

Get ready to take charge of your health! Setting up your device has never been easier. Follow these quick steps to get you started with your monitor.

First Time Setup Instructions

Charge Battery Before First Use

Connect the device to a USB port using the charging cable provided until charging symbol is green and battery symbol stop blinking.

Download the free iHealth app and set up your iHealth account

• Download the free iHealth MyVitals app from the App Store (iOS) or Google Play Store (Android).
• Launch the app and follow the on-screen instructions to sign up for an iHealth account.
• After your account has been created, you can access synced data from your smartphone or tablet, or view it from any computer by logging in at http://cloud.ihealthlabs.com. Simply click “Sign In” at the top, right-hand side of the page.

Compatible with all iPhone 4s+, iPod touch 5, iPad 3+, iPad mini+, iPad Air+, and select Android devices. Requires iOS version 7.0+ and Android version 4.0+. For a complete list of compatible devices, visit our support page at www.ihealthlabs.com/support.

Measure Your Blood Pressure

Blood pressure can be affected by the position of the cuff and your physiologic condition. It is very important that the cuff is positioned at your heart level during blood pressure measurements. To ensure accuracy, follow the step-by- step instructions below.

1. Place your hand palm-side up in front of you on a flat surface such as a desk or a table.
2. Sit comfortably with your feet flat on the floor without crossing your legs, and remain still during measurement.

3. Applying the cuff or press the “ START/STOP ” button on your monitor.
4. Adjust the height of your wrist, the monitor will detect your wrist position and the measurement will start ONLY when the correct position is detected. When the position is correct, press “ START/STOP ” button again to start measurement.

5. Results will be shown on the blood pressure monitor display.

Sync Results Via Bluetooth

Use Bluetooth to sync your readings to your iOS or Android device and save data to the secure iHealth cloud.

Connect to iOS via Bluetooth

1. Launch the iHealth MyVitals App from your iOS device.
2. Enable Bluetooth on your iOS device: Slide gently upward the iPhone screen from to open the Control Center, and click on the
3. Press “ START/STOP ” button for 3 seconds until Bluetooth indicator begins flashing — when a successful connection has been established, the Bluetooth indicator light will stop flashing.
4. Use the app to sync the result, the sync indicator will flash during synchronization and stop flashing when synchronization has been achieved.
5. Results will now be viewable from your iOS device or from any computer by logging in at www.ihealthlabs.com.

Note ：If you can’t sliding appear the Control Center, you can go to the Settings＞Bluetooth＞”On”. Then return back to the iHealth MyVitals app, and do Step3 again.

Connect to Android via Bluetooth

• Press “ START/STOP ” button for 2 seconds until Bluetooth indicator begins flashing.
• Enable Bluetooth on your Android device: Settings > Wireless & Networks > Bluetooth.
• Check the Bluetooth menu for the model name of your monitor (BP7SXXX) to appear, and then select it to pair. This may take up to 30 seconds and your monitor’s Bluetooth indicator will light up when a connection has been established.
• Launch the iHealth MyVitals app from your Android device to sync.
• The sync indicator will flash during synchronization and stop flashing when synchronization has been achieved.
• Results will now be viewable from your Android device or from any computer by logging in at www.ihealthlabs.com.

Note : If you are experiencing problems with the Bluetooth connection between the iHealth View and your Android device, follow these steps:

• Go into your device’s setting to pair it with your Android device. Check the Bluetooth menu for the model name of your monitor (BP7SXXX) to appear, and then select it to pair. This may take up to 30 seconds and your monitor’s Bluetooth indicator will stop flashing and turn solid when a connection has been established.
• Repeat the steps above when using your iHealth View with another Android device.

Reminders and Best Practices:

1. Make sure that your wrist size falls within the range of cuff circumference 5.3″- 8.7″ (13.5cm-22cm)
2. Always measure on the left wrist.
3. Remain still and calm for at least 1-1½ minutes before taking a reading.
4. Physical activity, eating, drinking, smoking, excitement, stress, and many other factors influence blood pressure results.
5. Prolonged over-inflation of the monitor may cause bruising to your wrist.
6. Keeps the cuff clean using a moistened cloth as needed.
7. DO NOT rinse the monitor or cuff under running water.

For additional product information, please visit www.ihealthlabs.com
For customer service, please contact iHealth at:
USA: Tel: +1-855-816-7705
support@ihealthlabs.com

Device Compatibility

Apple iOS devices (requires iOS version 8.0 or higher

• iPhone 7/7 Plus
• iPhone 6S/6S Plus
• iPhone 6/6 Plus
• iPhone 5S/5C
• iPhone 5
• iPhone 4S
• iPad Air 2
• iPad Air
• iPad Mini 3
• iPad Mini 2
• iPad Mini
• iPad Pro
• iPad 4th Gen
• iPad 3rd Gen
• IPod Touch 6th Gen
• IPod Touch 5th Gen

Android devices (requires operating system 4.0 or later)

• Samsung Galaxy S7/S7 Edge

• Samsung Galaxy S6/S6 Edge

• Samsung Galaxy S5

• Samsung Galaxy S4

• Samsung Galaxy S3

• Samsung Galaxy Note3

• Samsung Galaxy Note2

• HTC One M7

• LG Nexus 4

• LG Nexus 5

• Motorola Nexus 6

FAQs

Troubleshooting:

__Why does the Bluetooth connection not work?

Check the connection between the mobile device and the Wireless Blood Pressure Wrist Monitor. You may need to exit the app, re-connect the Blood Pressure Monitor and start the App again.

If you receive a connection error message or have trouble connecting to your Blood Pressure Monitor with your compatible device, follow the steps below:

• For iOS device:
  1. Go to your Bluetooth settings and turn off Bluetooth.
  2. Reboot your iOS device by pressing the power button until you are prompted to slide to power off.
  3. After the reboot cycle has completed go ahead and power on your iOS device and enable Bluetooth.
  4. Press the “START/STOP” button on the wrist monitor for 3 seconds until the Bluetooth indicator begins flashing.
  5. Proceed to launch the iHealth My Vitals App to sync your measurements.
• For Android device:
  1. Go to your Bluetooth settings and unpair the BP7SXXXXXX from your Bluetooth list.
  2. Turn Bluetooth off and reboot your Android device. After the reboot cycle has completed proceed to enable Bluetooth.
  3. After the reboot cycle has completed go ahead and power on your Android device and enable Bluetooth. Proceed to pair the Blood Pressure Monitor again in the Bluetooth settings and launch the iHealth My Vitals App to start measurement.

__Why does the iHealth Wireless Blood Pressure Wrist Monitor not power

on when I apply the cuff?

Make sure the cuff is applied to your bare wrist, and press “START/STOP” to manually turn on the device.

__Why does the Wireless Blood Pressure Wrist Monitor not start the

measurement when I manually press the “START/STOP” button?

The battery level might be too low. Charge the monitor fully before using

Setup and Usage:

__Can the Wireless Blood Pressure Wrist Monitor be used with more than

one mobile device?

Yes, you can use the Blood Pressure Wrist Monitor with as many different mobile devices you want. Just install the iHealth MyVitals app on each device you intend to use with the monitor.

__Can measurements be taken without a mobile device?

Yes. The View can only take measurements while not connected to your mobile device. When you are ready to sync, just follow the steps in the Quick Start Guide to sync.

Product Information:

__Are there any risks in taking a blood pressure measurement with this

device at home?

There are no physical risks associated with using this device to take your blood pressure at home. If you find the measurement procedure uncomfortable, consult with your healthcare professional regarding proper cuff application and tightness. This monitor is not suitable for use by people with serious arrhythmia due to the possibility of inaccurate measurements.

__What is the cuff size?

The cuff circumference of the iHealth Wireless Blood Pressure Wrist Monitor is 5.3” – 8.6”(13.5 cm – 22 cm)

__What is motion sensor technology?

Wrist blood monitors are sensitive to the wrist position. The iHealth Wireless Blood Pressure Wrist Monitor features a motion sensor technology and arrows to detect the optimal wrist position to help users take their blood pressure reading correctly. The key is to remember to always keep the monitor parallel and aligned with your heart level.

__What are the benefits of monitoring blood pressure at home?

Home monitoring is a great way to help detect and monitor high blood pressure. Regular readings taken over a period of time can track the history of your results and indicate any changes, fluctuations or elevations in your blood pressure. An individual high reading is not necessarily an indication of hypertension or other health issue. The iHealth Wireless Blood Pressure Monitor provides a convenient way to test, track and share your results.

__How accurate is the iHealth Wireless Blood Pressure Monitor?

The iHealth Wireless Blood Pressure Monitor has obtained CE medical certification (Europe) as well as FDA approval (USA). The monitor also has obtained ESH Certification (European Society of Hypertension).

__Who can use the iHealth Wireless Blood Pressure Wrist Monitor?

The iHealth Blood Pressure Monitor is designed for adults. It should not be used on infants, young children, pregnant or pre-eclamptic patients, in addition to people with serious arrhythmia.

__How is the cuff cleaned?

The cuff can be cleaned with a soft cloth lightly moistened with Ethyl alcohol (75-90%) and air dried.

__What is the lifespan of the Wireless Blood Pressure Wrist Monitor?

The monitor lasts a minimum of 10,000 measurements, or 3 years of usage.

__What is the battery life of the Wireless Blood Pressure Wrist

Monitor?

The rechargeable battery is built in and the monitor can take up to 80 measurements on a full charge.

DOWNLOAD

iHealth View BP7S Wireless Blood Pressure Wrist Monitor:

Quick Start Guide – [Download PDF]

Owner’s Guide – [Download PDF]

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>