FORTIN 2024 Standard-Key Remote Starters and Alarm Systems Installation Guide
- June 13, 2024
- FORTIN
Table of Contents
**FORTIN 2024 Standard-Key Remote Starters and Alarm Systems Installation Guide
**
Vehicle functions supported in this diagram (functional if equipped)
YEARS
- Lock
- Unlock
- Arm
- Disarm
- Trunk (open)
- Parking Lights
- Tachometer
- Door Status
- Trunk Status
- Hand-Brake Status
- Foot-Brake Status
- OEM Remote monitoring
- R.S. OEM remote Stand Alone compatible
BYPASS FIRMWARE VERSION VERSION LOGICIELLE CONTOURNEMENT
To add the firmware version and the options, use the FLASH LINK UPDATER or FLASH LINK MOBILE tool, sold separately.
| Program bypass option: | UNIT OPTION OPTION UNITE | DESCRIPTION |
|---|---|---|
| **** | C1 | OEM Remote status (Lock/Unlock) monitoring |
| IF THE VEHICLE IS NOT EQUIPPED WITH FUNCTIONAL HOOD PIN: | A11 | OFF NON |
trigger (Output Status).
Program bypass option (If equiped with OEM alarm):| D2| Unlock before / Lock
after (Disarm OEM alarm)
Program remote starter option for R.S. OEM REMOTE STAND ALONE:
| FUNCTION | MODE | DESCRIPTION |
|---|---|---|
| 38 | 2 | Enable : Press 3x Lock to remote start with the OEM remote |
MANDATORY INSTALL
*HOOD NON PIN
HOOD STATUS : THE HOOD PIN SWITCH (INCLUDED) MUST BE INSTALLED IF THE
VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF.
Notice: the installation of safety elements are mandatory. The hood pin and the sticker are essential security elements and must be installed.
THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.
DESCRIPTION
AUTOMATIC TRANSMISSION WIRING CONNECTION
PROGRAMMING PROCEDURE
Press and hold the programming button:
Insert the 6-Pin Main connector.
Release the programming button when the BLUE LED i ON.
If the BLUE LED is not ON soli disconnect the 6-Pin Main connector and go back to step 1.
Insert the required remaining connectors.
Turn the Ignition to the ON/RUN position.
The BLUE LED will flash rapidly
Turn the Ignition to the OFF position.
The BLUE LED will turn off.
The module is now programmed.
REMOTE STARTER PROGRAMMING PROCEDURE
REMOTE STARTER FUNCTIONALITY
All doors must be closed.
Remote start the vehicle.
Unlock the doors with the remote-starter remote or the OEM remote.
Insert and Turn the key to the Ignition ON/RUN position.
Press the brake pedal.
The vehicle can now be put in to gear and driven.
Notice: Updated Firmware and Installation Guides
Updated fi rmware and installation guides are posted on our web site on a
regular basis. We recommend that you update this module to the latest firmware
and download the latest installation guide(s) prior to the installation of
this product.
Module labe
WARNING
The information on this sheet is provided on an (as is) basis with no
representation or warranty of accuracy whatsoever.
It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualified technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.
TECH SUPPORT
Tél: 514-255-HELP (4357)
1-877-336-7797
WEB UPDATE
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>