MINKA LAVERY 759-2-66A-L Vantage 15 in 1-Light Black LED Flush Mount Installation Guide
- June 13, 2024
- MINKA LAVERY
Table of Contents
MINKA LAVERY 759-2-66A-L Vantage 15 in 1-Light Black LED Flush Mount
Product Information
The product is an electrical fixture, identified by the item numbers 759-2-XX-L and 769-2-XX-L. It comes with installation instructions and important safety warnings. The fixture requires a power source and needs to be connected to an outlet box. It is recommended to have a qualified electrician install the fixture to ensure proper wiring and installation.
Product Usage Instructions
- Before starting the installation, make sure to shut off the power at the fuse box or circuit breaker box. This is important for safety.
- Remove the old fixture, including the mounting hardware, from the outlet box.
- Unpack the new fixture and lay out all the parts in a clean area, taking care not to misplace any small parts necessary for installation.
- Attach the mounting plate (B) to the outlet box (A) using the provided outlet box screws (C).
- Attach the support cable (F) to the slotted holes on the mounting plate (B), ensuring that the support cable can support the weight of the fixture while wiring.
- Pull out the power supply wires from the outlet box (A). Connect the black supply wire to the black fixture wire using a wire nut (D). Connect the white supply wire to the white fixture wire using a wire nut (D). Connect the fixture ground wire and the supply ground wire together using a wire nut (D). Wrap all wire connections with electrical tape for a more secure connection.
- Carefully tuck all wires and wire connections into the outlet box (A).
- Raise the fixture body and align the tab to the clamping position (E) of the mounting plate (B). Push upward and rotate to install until tightened.
- Turn on the power and test the fixture to ensure it is functioning correctly.
Important: It is recommended to have the fixture installed by a qualified electrician to ensure proper wiring and installation.
Care and Maintenance
To clean the surface of the fixture, use a clean, soft cloth. Do not use
any cleaners with chemicals, solvents, or harsh abrasives as they may damage
the fixture.
Dimming: The fixture is dimmable with ELV and/or LED compatible wall dimmer switches.
INSTALLATION INSTRUCTIONS
Item# 759-2-XX-L/769-2-XX-L
READ AND SAVE THESE INSTRUCTIONS
WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.
READ AND SAVE THESE INSTRUCTIONS
WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.
PREPARATION
-
Shut off power at the fuse box or circuit breaker box and remove the old fixture including the mounting hardware.
-
Carefully unpack your new fixture and lay out all the parts in a clean area. Take care not to misplace any small parts necessary for installation.
INSTALLATION & ASSEMBLY (Fig.1 & Fig.2) -
Attach mounting plate (B) to outlet box (A) (Not included) using the outlet box screws (C) provided.
-
Attach support cable (F) to the slotted holes on mounting plate. (B), carefully allow support cable (F) to support weight of fixture while wiring.
-
Pull power supply wires out from outlet box (A). Connect black supply wire to the black fixture wire using wire nut (D). Connect the white supply wire to the white fixture wire using wire nut (D). Connect the fixture ground wire and the supply ground wire together using wire nut (D). Wrap all wire connections with electrical tape for a more secure connection.
-
Carefully tuck all wires and wire connections into outlet box (A).
-
Raise fixture body and align tab to the clamping position ( E ) of mounting plate ( B ). Push upward and rotate to install until tightening.
Your installation is now complete. Return power and test the fixture.
Care and maintenance
Use a clean, soft cloth to wipe the surface of the fixture.
DO NOT use any cleaners with chemicals, solvents or harsh abrasives.
Dimming:
Dimmable with ELV and/or LED compatible wall dimmer switches.
IMPORTANT:
FIXTURE SHOULD BE INSTALLED BY A QUALIFIED ELECTRICIAN TO ENSURE PROPER WIRING
AND INSTALLATION.