MINKA LAVERY 769-2-44-L Vantage 15 in 1-Light White LED Mount Instruction Manual

MINKA LAVERY 769-2-44-L Vantage 15 in 1-Light White LED Mount

Product Information

This product is an electrical fixture with the item numbers 759-2-XX-L and 769-2-XX-L. It is designed for installation in residential or commercial settings. The fixture requires electrical power to operate and comes with a mounting plate, mounting screw, and support cable. It is important to follow the installation instructions provided to ensure proper wiring and installation.

Product Usage Instructions

1. Before starting the installation, shut off the power at the fuse box or circuit breaker box.

2. Remove the old fixture, including the mounting hardware.

3. Carefully unpack the new fixture and lay out all the parts in a clean area. Make sure not to misplace any small parts.

4. Attach the mounting plate (B) to the outlet box (A) using the provided outlet box screws (C).

5. Attach the support cable (F) to the slotted holes on the mounting plate (B), ensuring it can support the weight of the fixture while wiring.

6. Pull the power supply wires out from the outlet box (A).
   Connect the black supply wire to the black fixture wire using awire nut (D). Connect the white supply wire to the white fixture wire using a wire nut (D). Connect the fixture ground wire and the supply ground wire together using a wire nut (D). Wrap all wire connections with electrical tape for a more secure connection.

7. Carefully tuck all wires and wire connections into the outlet box (A).

8. Raise the fixture body and align the tab to the clamping position (E) of the mounting plate (B). Push upward and rotate to install until tightened.

9. Your installation is now complete. Restore power and test the fixture.

Important: It is recommended that a qualified electrician perform the installation to ensure proper wiring and installation.

Care and Maintenance:
To keep the fixture clean, use a clean, soft cloth to wipe the surface. Do not use any cleaners with chemicals, solvents, or harsh abrasives, as they may damage the fixture.

Dimming: This fixture is dimmable with ELV and/or LED-compatible wall dimmer switches.

INSTALLATION INSTRUCTIONS

Item# 759-2-XX-L/769-2-XX-L
READ AND SAVE THESE INSTRUCTIONS

WARNING!S HUTPOWEROFFAT FUSEORCIRCUITBREAKER.

READ AND SAVE THESE INSTRUCTIONS

WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.
AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.

PREPARATION

1. Shut off power at the fuse box or circuit breaker box and remove the old fixture including the mounting hardware.

2. Carefully unpack your new fixture and lay out all the parts in a clean area. Take care not to misplace any small parts necessary for installation.
   INSTALLATION & ASSEMBLY (Fig.1 & Fig.2)

3. Attach mounting plate (B) to outlet box (A) (Not included) using the outlet box screws (C) provided.

4. Attach support cable (F) to the slotted holes on mounting plate (B), carefully allow support cable (F) to support weight of fixture while wiring.

5. Pull power supply wires out from outlet box (A). Connect black supply wire to the black fixture wire using wire nut (D). Connect the white supply wire to the white fixture wire using wire nut (D). Connect the fixture ground wire and the supply ground wire together using wire nut (D). Wrap all wire connections with electrical tape for a more secure connection.

6. Carefully tuck all wires and wire connections into outlet box (A).

7. Raise fixture body and align tab to the clamping position ( E ) of mounting plate ( B ). Push upward and rotate to install until tightening.
   Your installation is now complete. Return power and test the fixture.

Care and maintenance

Use a clean, soft cloth to wipe the surface of the fixture.
DO NOT use any cleaners with chemicals, solvents or harsh abrasives.

Dimming: Dimmable with ELV and/or LED compatible wall dimmer switches.

IMPORTANT: FIXTURE SHOULD BE INSTALLED BY A QUALIFIED ELECTRICIAN TO ENSURE PROPER WIRING AND INSTALLATION.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>