Minka Lavery 759-2-44-L Vantage 1 Light 11 in White LED Flush Mount Light Instruction Manual
- June 13, 2024
- MINKA LAVERY
Table of Contents
Minka Lavery 759-2-44-L Vantage 1 Light 11 in White LED Flush Mount Light
Product Information
The product is an electrical fixture with the item number 759-2-XX-L/769-2-XX-L. It comes with a mounting plate, mounting screws, and a support cable. The fixture should be installed by a qualified electrician to ensure proper wiring and installation. The fixture is dimmable with ELV and/or LED compatible wall dimmer switches. It is important to follow the installation instructions provided below to ensure safe and correct installation.
Product Usage Instructions
- Before starting the installation, shut off power at the fuse box or circuit breaker box.
- Remove the old fixture and its mounting hardware.
- Unpack the new fixture and lay out all the parts in a clean area, taking care not to misplace any small parts.
- Attach the mounting plate (B) to the outlet box (A) using the outlet box screws (C) provided.
- Attach the support cable (F) to the slotted holes on the mounting plate (B), making sure it can support the weight of the fixture while wiring.
- Pull the power supply wires out from the outlet box (A).
- Connect the black supply wire to the black fixture wire using a wire nut (D).
- Connect the white supply wire to the white fixture wire using a wire nut (D).
- Connect the fixture ground wire and the supply ground wire together using a wire nut (D).
- Wrap all wire connections with electrical tape for a more secure connection.
- Carefully tuck all wires and wire connections into the outlet box (A).
- Raise the fixture body and align the tab to the clamping position (E) of the mounting plate (B).
- Push upward and rotate to install until tightening.
- Return power and test the fixture to ensure it is functioning properly.
For care and maintenance, use a clean, soft cloth to wipe the surface of the fixture. Do not use any cleaners with chemicals, solvents, or harsh abrasives.
INSTALLATION INSTRUCTIONS
Item# 759-2-XX-L/769-2-XX-L READ AND SAVE THESE INSTRUCTIONS
WARNING! SHUT POWER OFF AT FUSE OR CIR CUIT BREAKER.
READ AND SAVE THESE INSTRUCTIONS
WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.
PREPARATION
-
Shut off power at the fuse box or circuit breaker box and remove the old fixture including the mounting hardware.
-
Carefully unpack your new fixture and lay out all the parts in a clean area. Take care not to misplace any small parts necessary for installation.
INSTALLATION & ASSEMBLY (Fig.1 & Fig.2) -
Attach mounting plate (B) to outlet box (A) (Not included) using the outlet box screws (C) provided.
-
Attach support cable (F) to the slotted holes on mounting plate (B), carefully allow support cable (F) to support weight of fixture while wiring.
-
Pull power supply wires out from outlet box (A). Connect black supply wire to the black fixture wire using wire nut (D). Connect the white supply wire to the white fixture wire using wire nut (D). Connect the fixture ground wire and the supply ground wire together using wire nut (D). Wrap all wire connections with electrical tape for a more secure connection.
-
Carefully tuck all wires and wire connections into outlet box (A).
-
Raise fixture body and align tab to the clamping position ( E ) of mounting plate ( B ). Push upward and rotate to install until tightening.
Your installation is now complete. Return power and test the fixture.
IMPORTANT: FIXTURE SHOULD BE INSTALLED BY A QUALIFIED ELECTRICIAN TO ENSURE PROPER WIRING AND INSTALLATION.
Care and maintenance
Use a clean, soft cloth to wipe the surface of the fixture.
DO NOT use any cleaners with chemicals, solvents or harsh abrasives.
Dimming: Dimmable with ELV and/or LED-compatible wall dimmer switches.