Minka Lavery 759-2-XX-L Vantage 15 in 1 Light Brushed Nickel LED Flush Mount Instruction Manual
- June 13, 2024
- MINKA LAVERY
Table of Contents
Minka Lavery 759-2-XX-L Vantage 15 in 1 Light Brushed Nickel LED Flush
Mount
PREPARATION
-
Shut off power at the fuse box or circuit breaker box and remove the old fixture including the mounting hardware. Carefully unpack your new fixture and lay out all the parts in a clean area. Take care not to misplace any small parts necessary for installation.
-
INSTALLATION & ASSEMBLY (Fig.1 & Fig.2)
Attach mounting plate (B) to outlet box (A) (Not included) using the outlet box screws (C) provided. -
Attach support cable (F) to the slotted holes on the mounting plate (B), and carefully allow support cable (F) to support the weight of the fixture while wiring.
-
Pull power supply wires out from outlet box (A). Connect the black supply wire to the black fixture wire using wire nut (D). Connect the white supply wire to the white fixture wire using wire nut (D). Connect the fixture ground wire and the supply ground wire together using wire nut (D). Wrap all wire connections with electrical tape for a more secure connection.
-
Carefully tuck all wires and wire connections into outlet box (A). Raise the fixture body and align the tab to the clamping position ( E ) of the mounting plate ( B ). Push upward and rotate to install until tightening. Your installation is now complete. Return power and test the fixture.
Care and maintenance
- Use a clean, soft cloth to wipe the surface of the fixture.
- DO NOT use any cleaners with chemicals, solvents, or harsh abrasives.
- Dimming: Dimm
IMPORTANT: THE FIXTURE SHOULD BE INSTALLED BY A QUALIFIED ELECTRICIAN TO ENSURE PROPER WIRING AND INSTALLATION.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>