FORTIN 62181 Kia Forte 2017 Standard Key Remote Starters and Alarm Systems Instructions
- June 13, 2024
- FORTIN
Table of Contents
FORTIN 62181 Kia Forte 2017 Standard Key Remote Starters and Alarm
Systems
THAR-ONE-KHY2 HARNESS INSTALLATION
AUTOMATIC TRANSMISSION ONLY
MANUAL TRANSMISSION ONLY
NOTES
The vehicle’s OEM remote will not be operable during remote start.
MANDATORY INSTALL
HOOD STATUS: THE HOOD PIN SWITCH (INCLUDED) MUST BE INSTALLED IF THE VEHICLE
CAN BE THE REMOTE STARTED WITH THE HOOD OPEN, AND SET FUNCTION A11 TO OFF.
SECURITY STICKER
Notice: the installation of safety elements is mandatory. The hood pin
and the stickers are essential security elements and must be installed. THIS
MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN
CAUSE PERMANENT DAMAGE TO THE VEHICLE.
DESCRIPTION
AUTOMATIC TRANSMISSION WIRING CONNECTION
MANUAL TRANSMISSION WIRING CONNECTION
KEY BYPASS PROGRAMMING PROCEDURE
Use the remote of the remote starter or security system to test all of the supported features to ensure proper programming.
PROGRAM.: 2 VEHICLE WITHOUT EMS COM WIRE |PROGRAMMING PROCEDURE
REMOTE STARTER PROGRAMMING PROCEDURE
REFER TO THE QUICK INSTALL GUIDE INCLUDED WITH THE MODULE FOR THE REMOTE
STARTER PROGRAMMING.
VEHICLE EQUIPPED WITH OEM ALARM
Some vehicles must be UNLOCKED to disarm the OEM alarm before remote start.
Enable option D2 using the FlashLink Manager. When this option is enabled the
module will automatically UNLOCK before remote start and LOCK after the
vehicle has remote started.
Notice: Updated Firmware and Installation Guides
Updated fi firmware and installation guides are posted on our website on a
regular basis. We recommend that you update this module to the latest firmware
and download the latest installation guide(s) prior to the installation of
this product.
WARNING
The information on this sheet is provided on an (as is) basis with no
representation or warranty of accuracy whatsoever. It is the sole
responsibility of the installer to check and verify any circuit before
connecting to it. Only a computer-safe logic probe or digital multimeter
should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or
responsibility whatsoever pertaining to the accuracy or currency of the
information supplied. The installation in every case is the sole
responsibility of the installer performing the work and FORTIN ELECTRONIC
SYSTEMS assumes no liability or responsibility whatsoever resulting from any
type of installation, whether performed properly, improperly, or in any other
way. Neither the manufacturer nor distributor of this module is responsible
for damages of any kind indirectly or directly caused by this module, except
for the replacement of this module in case of manufacturing defects. This
module must be installed by a qualified technician. The information supplied is
a guide only. This instruction guide may change without notice. Visit
www.fortinbypass.com to get the latest version.
TECH SUPPORT
Tél: 514-255-HELP (4357)
1-877-336-7797
ADDENDUM GUIDE www.fortinbypass.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>