FORTIN 78681 GMC Sierra 3500 2019 Standard Key Remote Starters and Alarm Systems Installation Guide
- June 13, 2024
- FORTIN
Table of Contents
FORTIN 78681 GMC Sierra 3500 2019 Standard Key Remote Starters and Alarm
Systems
STAND-ALONE INSTALLATION
ONLY COMPATIBLE WITH AUTOMATIC TRANSMISSION VEHICLES.
MANDATORY INSTALL
HOOD STATUS: THE HOOD PIN SWITCH MUST BE INSTALLED IF THE VEHICLE CAN BE
REMOTE-STARTED WITH THE HOOD OPEN, AND SET FUNCTION A11 TO OFF.
Notice: the installation of safety elements is mandatory. The hood pin is
an essential security element and must be installed.
THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.
PARTS REQUIRED (NOT INCLUDED)
STAND-ALONE CONFIGURATION
CUT THIS WARNING CARD AND STICK IT IN A VISIBLE PLACE
or use the package RSPB, Sold separately.
WARNING
THE VEHICLE CAN BE STARTED BY EITHER: PRESSING THE LOCK BUTTON ON THE OEM
REMOTE 3 TIMES CONSECUTIVELY OR BY A SMARTPHONE. TURN ON THE SAFETY SWITCH
LOCATED UNDER THE DASHBOARD BEFORE WORKING ON THE VEHICLE.
DESCRIPTION
CONFIG.1 AUTOMATIC TRANSMISSION WIRING CONNECTION
CONFIG.2 DESCRIPTION
CONFIG.2 AUTOMATIC TRANSMISSION WIRING CONNECTION
DECRYPTOR PROGRAMMING PROCEDURE
KEY BYPASS PROGRAMMING PROCEDURE 2/2
OPTIONAL RF-KIT PROGRAMMING
REMOTE STARTER FUNCTIONALITY
Notice: Updated Firmware and Installation Guides Updated firmware and installation guides are posted on our website on a regular basis. We recommend that you update this module to the latest firmware and download the latest installation guide(s) prior to the installation of this product.
WARNING
The information on this sheet is provided on an (as is) basis with no
representation or warranty of accuracy whatsoever. It is the sole
responsibility of the installer to check and verify any circuit before
connecting to it. Only a computer-safe
logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS
assumes absolutely no liability or responsibility whatsoever pertaining to the
accuracy or currency of the information supplied. The installation in every
case is the sole responsibility of the installer performing the work and
FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever
resulting from any type of installation, whether performed properly,
improperly or in any other way.
Neither the manufacturer nor distributor of this module is responsible for
damages of any kind indirectly or directly caused by this module, except for
the replacement of this module in case of manufacturing defects. This module
must be
installed by a qualified technician. The information supplied is a guide only.
This instruction guide may change without notice. Visit
www.fortinbypass.com to get the latest version.
TECH SUPPORT
Tél: 514-255-HELP (4357)
1-877-336-7797
ADDENDUM GUIDE
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>