FORTIN 78561 GMC Sierra 3500 2019 Standard Key Remote Starters and Alarm Systems Installation Guide

FORTIN 78561 GMC Sierra 3500 2019 Standard Key Remote Starters and Alarm

Systems

Product Information

• Product Name : EVO-ONE
• Manufacturer: Fortin
• Model Number: Guide # 78561
• Compatibility: Chevrolet Silverado 1500, Silverado 1500 Limited, Silverado 2500-3500, Suburban, Tahoe, GMC Sierra 1500, Sierra 1500 Limited, Sierra 2500-3500, Yukon (2014-2018, 2019, 2015-2020)
• Bypass Firmware Version: 70.[45]

Product Usage Instructions

1. To add firmware version and options, use the FLASH LINK UPDATER or FLASH LINK MOBILE tool (sold separately).
2. Program the bypass option by selecting the desired configuration using the provided unit option.
3. If using the hood pin feature, connect the hood pin switch (included) and set function A11 to OFF if remote starting with the hood open.
4. Install the module by a qualified technician to avoid permanent damage to the vehicle.
5. For automatic transmission wiring connection, follow the provided guide for the specific wire colors and connections.
6. Cut the loop for automatic transmission mode if applicable.

REGULAR INSTALLATION

Vehicle functions supported in this diagram (functional if equipped)

REGULAR INSTALLATION
ADDENDUM – SUGGESTED WIRING CONFIGURATION
Vehicle functions supported in this diagram (functional if equipped)

VEHICLE VEHICULES| YEARS ANNÉES| CONFIGURATION 1 AT IGNITION SWITCH AU COMMUTATEUR D’IGNITION| CONFIGURATION 2 AT BCM

AU BCM

| Immobilizer bypass Contournement d’immobilisateur| Lock| Unlock| Arm| Disarm| Trunk (open)| RAP Disable| Tachometer| Door Status| Trunk Status| Hood Status*| Hand-Brake Status| Foot-Brake Status| PK3, Passlock| OEM remote Monitoring| R.S. OEM  remote Stand Alone compatible
CHEVROLET| | | | | | | | | | | | | | | | | | |
Silverado 1500| 2014-2018| P.2-3| P.4-5| •| •| •| •| •| •| •| •| •| •| •| •| •| •| •| •
Silverado 1500 Limited| 2019| P.2-3| P.4-5| •| •| •| •| •| •| •| •| •| •| •| •| •| •| •| •
Silverado 2500-3500| 2015-2020| P.2-3| P.4-5| •| •| •| •| •| •| •| •| •| •| •| •| •| •| •| •
Suburban| 2015-2019| P.2-3| P.4-5| •| •| •| •| •| •| •| •| •| •| •| •| •| •| •| •
Tahoe| 2015-2019| P.2-3| P.4-5| •| •| •| •| •| •| •| •| •| •| •| •| •| •| •| •
Yukon| 2015-2019| P.2-3| P.4-5| •| •| •| •| •| •| •| •| •| •| •| •| •| •| •| •**

GM

Sierra 1500| 2014-2018| P.2-3| P.4-5| •| •| •| •| •| •| •| •| •| •| •| •| •| •| •| •
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---
Sierra 1500 Limited| 2019| P.2-3| P.4-5| •| •| •| •| •| •| •| •| •| •| •| •| •| •| •| •
Sierra 2500-3500| 2015-2020| P.2-3| P.4-5| •| •| •| •| •| •| •| •| •| •| •| •| •| •| •| •
Yukon| 2015-2019| P.2-3| P.4-5| •| •| •| •| •| •| •| •| •| •| •| •| •| •| •| •
BYPASS FIRMWARE VERSION VERSION LOGICIELLE CONTOURNEMENT| To add the firmware version and the options, use the FLASH LINK UPDATER or FLASH LINK MOBILE tool, sold separately.FLASH LINK MOBILE,
---|---
70.| [ 45 ]
| MINIMUM

MANDATORY INSTALL

HOOD PIN

HOOD STATUS : THE HOOD PIN SWITCH (INCLUDED) A11 MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF.

SECURITY STICKER

Notice : the installation of safety elements are mandatory. The hood pin and the sticker are essential security elements and must be installed.

THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.

DESCRIPTIONS

CONFIG.1 DESCRIPTION

CONFIG.1 AUTOMATIC TRANSMISSION WIRING CONNECTION

CONFIG.2 DESCRIPTION CONFIG.2 AUTOMATIC TRANSMISSION WIRING CONNECTION

**

DCRYPTOR PROGRAMMING PROCEDURE**

Parts required
(not included)

• 1x FLASH LINK UPDATER,
• 1x FLASH LINK MANAGER SOFTWARE PROGRAMME
• 1x Microsoft Windows Computer with Internet connection Ordinateur Microsoft Windows avec connection Internet
• 1x FLASH LINK MOBILE
• 1x FLASH LINK MOBILE APP
• 1x Smartphone Android or iOS with Internet connection (Internet provider charges may apply)

BEFORE PROGRAMMING SET THE UNIT OPTIONS AND SAVE.

• Press and hold the programming button:
  • Insert the 6-PinMain connector.
• Release the programming button when the LED is YELLOW.
  • If the LED is not solid YELLOW disconnect the 6-Pin connector (Main-Harness) and go back to step 1.
• Insert the required remaining connectors.
• Press and release the programming button five times (5x). L The YELLOW LED will alternate between 5x flashes and a pause. Wait until the YELLOW LED turns ON
• Turn  to the ON/RUN position.
  • The RED LED will turns ON.
  • The YELLOW LED turns OFF.
  • If the LED is not solid YELLOW disconnect the 6-Pin connector (Main-Harness) and go back to step 1.
• Turn the Ignition to the OFF position.
• Remove the key from the ignition barrel.

KEY BYPASS PROGRAMMING PROCEDURE

• Wait 5 seconds.

• Turn the Ignition to the ON position.

  • The BLUE LED will turns ON.
  • Wait, the BLUE & RED LED will turns OFF.
  • Wait, the YELLOW LED will Flash.
  • Wait, the YELLOW LED will turns OFF.
  • Wait, the BLUE LED will Flash rapidly.
  • If the LEDs do not react as shown, the 6-Pin connector (Main-Harness) andgo back to step 1.

• WITHOUT ON-STAR®
  Press and release the programming button once  (1x).

• Turn the key to the OFF position.

  • the BLUE LED flash slowly.

• Disconnect all connectors and after the 6-Pin (Main-Harness) or the 4-Pin Data-link connector.

• Microsoft Windows Computer with Internet connection

• Smartphone (Internet provider charges may apply)
  Use the tool:
  FLASH LINK UPDATER or FLASH LINK MOBILE to visit the DCryptor menu.

• AFTER DCRYPTOR PROGRAMMING COMPLETED Go back to the vehicle and reconnect the 6-Pin (Main-Harness) or the 4-pins (Data-Link) connector and after all the remaining connector.

The module is now programmed.

REMOTE STARTER

ALARM VERIFICATION PROCEDURE
Test the remote starter. Remote start the vehicle.

REMOTE STARTER PROGRAMMING PROCEDURE

REFER TO THE QUICK INSTALL GUIDE INCLUDED WITH THE MODULE FOR THE REMOTE STARTER PROGRAMMING.

REMOTE STARTER FUNCTIONALITY

• All doors must be closed.
• Remote start the vehicle.
• Unlock the doors with the remote-starter remote or the OEM remote.
• Insert and Turn the key to the Ignition ON/RUN position.
• Press the brake pedal The vehicle can now be put in to gear and driven.

Notice: Updated Firmware and Installation Guides Updated fi rmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest fi rmware and download the latest installation guide(s) prior to the installation of this product.

WARNING
The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever. It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe  logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability orresponsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualifi ed technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.

TECH SUPPORT

• Tel: 514-255-HELP (4357) 1-877-336-7797
• www.fortinbypass.com

WEB UPDATE

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>