FORTIN 65411 Chevrolet Trax 2019 Push-to-Start Remote Starters and Alarm Systems Installation Guide
- June 13, 2024
- FORTIN
Table of Contents
FORTIN 65411 Chevrolet Trax 2019 Push-to-Start Remote Starters and Alarm
Systems
REGULAR INSTALLATION
MANDATORY INSTALL
HOOD STATUS
THE HOOD PIN SWITCH MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE-STARTED
WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF
Notice
the installation of safety elements is mandatory. The hood pin is an
essential security element and must be installed. THIS MODULE MUST BE
INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT
DAMAGE TO THE VEHICLE
DESCRIPTION
AUTOMATIC TRANSMISSION WIRING CONNECTION
Remove the battery from the OEM remote.
KEY BYPASS PROGRAMMING PROCEDURE
KEY BYPASS PROGRAMMING PROCEDURE 2/3
KEY BYPASS PROGRAMMING PROCEDURE 3/3
AFTER DCRYPTOR PROGRAMMING COMPLETED
Go back to the vehicle and reconnect the 4-Pin (Data-Link) connector and after
that, all the remaining connectors.
REMOTE STARTER FUNCTIONALITY
If the vehicle is not unlocked with one of these conditions the remote starter will shut down as soon as any door is opened
Notice: Updated Firmware and Installation Guides Updated firmware and installation guides are posted on our website on a regular basis. We recommend that you update this module to the latest firmware and download the latest installation guide(s) prior to the installation of this product.
WARNING
The information on this sheet is provided on an (as is) basis with no
representation or warranty of accuracy whatsoever. It is the sole
responsibility of the installer to check and verify any circuit before
connecting to it. Only a computer-safe logic probe or digital multimeter
should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or
responsibility whatsoever pertaining to the accuracy or currency of the
information supplied. The installation in every case is the sole
responsibility of the installer performing the work and FORTIN ELECTRONIC
SYSTEMS assumes no liability or responsibility whatsoever resulting from any
type of installation, whether performed properly, improperly, or in any other
way. Neither the manufacturer nor distributor of this module is responsible
for damages of any kind indirectly or directly caused by this module, except
for the replacement of this module in case of manufacturing defects. This
module must be installed by a qualified technician. The information supplied
is a guide only. This instruction guide may change without notice. Visit
www.fortinbypass.com to get the latest version.
TECH SUPPORT
Tél: 514-255-HELP (4357) 1-877-336-7797
ADDENDUM GUIDE
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>