FORTIN EVO-ONE Volkswagen Golf 2016 Push Button Remote Starters and Alarm Systems Installation Guide
- June 13, 2024
- FORTIN
Table of Contents
FORTIN EVO-ONE Volkswagen Golf 2016 Push Button Remote Starters and Alarm
Systems
Vehicle functions
Golf MFD: 01-2014 to 08-2014
-
COMPATIBLE MODULE REQUIRED:
-
QR CODE: ON THE LABEL
-
MANUFACTURED AFTER: 2019
-
FIRMWARE VERSION: 65.[04]
To add the firmware version and the options, use the FLASH LINK UPDATER or FLASH LINK MOBILE tool, sold separately.
Golf MFD: 09-2014 & +
- COMPATIBLE MODULE REQUIRED:
- QR CODE: ON THE LABEL
- MANUFACTURED AFTER: 2019
- FIRMWARE VERSION VERSION LOGICIELLEl: 64.[06] VW MINIMUM
To add the firmware version and the options, use the FLASH LINK UPDATER or FLASH LINK MOBILE tool, sold separately.
NOTE:
Vehicle’s equipped with Virtual Cluster, not supported for the key bypass.
MANDATORY INSTALL
- HOOD PIN
- HOOD STATUS: THE HOOD PIN SWITCH MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN,SET FUNCTION A11 TO OFF.
- A11: OFF NON
- Notice: the installation of safety elements are mandatory. The hood pin is an essential security element and must be installed.
THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.
NOTES
- Program bypass option:
UNIT OPTION OPTION UNITE/DESCRIPTION
- C1
- OEM Remote status (Lock/Unlock) monitoring
- D6
- Push-to-Start
- D2
- Unlock before / Lock after (Disarm OEM alarm)
Parts Required
Parts required (Not included)
- 1x Fuse
- 2x Diodes
- 1x TB-VW (key bypass) Sold separately.
PROGRAMMING TOOL REQUIRED
for key bypass programming. Sold separately.
PARTS REQUIRED (NOT INCLUDED)
- 1x FLASH LINK UPDATER
- 1x FLASH LINK MANAGER SOFTWARE | PROGRAMME
- 1x Microsoft Windows Computer with Internet connection Ordinateur Microsoft Windows avec connection Internet
- 1x FLASH LINK MOBILE
- 1x FLASH LINK MOBILE APP
- 1x Smartphone AndroId or iOS with Internet connection (provider charges may apply).
MANDATORY
- HOOD PIN
- REMOTE START SAFETY OVERRIDE SWITCH
- VALET SWITCH COMMUTATEUR VALET
- Part: RSPB available, Sold separately.
Notice: the installation of safety elements are mandatory. The hood pin and the valet switch are essential security elements and must be installed.
STAND ALONE CONFIGURATION
REMOTE STARTER
REMOTE STARTER FUNCTIONALITY
- All doors must be closed.
- Press the OEM remote’s Lock Unlock Lock buttons to remote-start (or remote-stop) the vehicle.
- The vehicle will START.
REMOTE STARTER DIAGNOSTICS
MODULE RED LED | DEL ROUGE DU MODULE
- x2 flash: Brake ON
- x3 flash: No tach
- x4 flash: Ignition before start
- x5 flash: Hood Open
REMOTE STARTER WARNING CARD
CUT THIS WARNING CARD AND STICK IT ON A VISIBLE PLACE: or use the package RSPB, Sold separately.
WARNING/ATTENTION
REMOTE STARTER: THE VEHICLE CAN BE STARTED BY EITHER: PRESSING THE LOCK BUTTON ON THE OEM REMOTE 3 TIMES CONSECUTIVELY OR BY A SMARTPHONE. TURN ON THE SAFETY SWITCH LOCATED UNDER THE DASHBOARD BEFORE WORKING ON THE VEHICLE.
DESCRIPTION
AUTOMATIC TRANSMISSION
AUTOMATIC TRANSMISSION WIRING CONNECTION
DCRYPTOR PROGRAMMING PROCEDURE
- Take out the battery from the remote control.
- Place the transponder’s ring in front of the remote control.
- With the remote beside the antenna ring, proceed with the programming on the next pages.
KEY BYPASS
KEY BYPASS PROGRAMMING PROCEDURE 2/4
- Press and hold the programming button: Connect the 4-Pin Data-link connector. The BLUE, RED, YELLOW and BLUE & RED LEDs will alternatively illuminate.
- Release the programming button when the LED is BLUE.
- If the LED is not solid BLUE disconnect the 4-Pin connector (Data-Link) and go back to step 1.
- Insert the required remaining connectors.
- Press the Push-to-Start button to turn ON the ignition.
- Press and release the programming button once (1x). The BLUE LED will turn off.
- Wait The BLUE LED will flash rapidly.
- Press and hold the programming button. The BLUE LED will turn OFF.
- Wait The RED LED will turn ON
- Release the programming button.
NOTE: IF PROGRAMMING IS INTERRUPTED DURING THE PROCESS, SUCH AS A MODULE IS DISCONNECTED OR BY TURNING OFF THE IGNITION WITH THE KEY, IT IS POSSIBLE THAT THE VEHICLE WILL NO LONGER START NORMALLY, YOU MUST DISCONNECT AND RECONNECT THE VEHICLE BATTERY TO CORRECT THE SITUATION.
- Take out the remote control from the transponder’s ring.
- Insert the battery into the remote control.
- Connect the TB-VW instead of the R-LINK.
REMOTE STARTER FUNCTIONALITY
OPTIONAL
OPTIONAL RF-KIT PROGRAMMING
PROGRAM BYPASS OPTION
- Program bypass option:
- H2
- ☑ Supported RF-KITS enable
- ☑ H2 Fortin 2
OPTIONAL FORTIN RF KIT SERIES 4 OR SERIES 9 PROGRAMMING
Notice: Updated Firmware and Installation Guides Updated fi rmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest fi rmware and download the latest installation guide(s) prior to the installation of this product.
WARNING
The information on this sheet is provided on an (as is) basis with no
representation or warranty of accuracy whatsoever. It is the sole
responsibility of the installer to check and verify any circuit before
connecting to it. Only a computer safe logic probe or digital multimeter
should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or
responsibility whatsoever pertaining to the accuracy or currency of the
information supplied. The installation in every case is the sole
responsibility of the installer performing the work and FORTIN ELECTRONIC
SYSTEMS assumes no liability or responsibility whatsoever resulting from any
type of installation, whether performed properly, improperly or any other way.
Neither the manufacturer or distributor of this module is responsible of
damages of any kind indirectly or directly caused by this module, except for
the replacement of this module in case of manufacturing defects. This module
must be installed by qualifi ed technician. The information supplied is a
guide only. This instruction guide may change without notice. Visit
www.fortinbypass.com. to get the latest
version.
TECH SUPPORT
- Tél: 514-255-HELP (4357)
- 1-877-336-7797
- www.fortinbypass.com.
INTERFACE MODULE
- Made in Canada
- PATENTS PENDING US: 2007-228827-A1
- www.fortinbypass.com.
- Service No: 000 102 04 2536
- HARDWARE VERSION
- Date: xx-xx
- ADDENDUM – SUGGESTED WIRING CONFIGURATION
- REV: 20211111
- This guide may change without notice. See www.fortin.ca. for latest version.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>