FORTIN 91931 Toyota Corolla 2011 Push To Start Remote Starters And Alarm Systems Installation Guide

REV.: 20221118
GUIDE # 91931
STAND ALONE INSTALLATION
ADDENDUM – SUGGESTED WIRING CONFIGURATION

91931 Toyota Corolla 2011 Push To Start Remote Starters And Alarm

Systems

ONLY COMPATIBLE WITH AUTOMATIC TRANSMISSION VEHICLES.

Vehicle functions supported in this diagram (functional if equipped)

TOYOTA
Corolla| Push-to-Start 2009-2013
•| Immobilizer bypass
•| Lock
•| Unlock
•| Arm
•| Disarm
•| Trunk (open)
•| Tachometer
•| Door Status
•| Trunk Status
•| Hood Status
•| Hand-Brake Status
•| Foot-Brake Status
•| OEM Remote monitoring

MANUFACTURED AFTER: 2019

FIRMWARE VERSION
79.[66] MINIMUM
To add the firmware version and the options, use the FLASH LINK UPDATER or FLASH LINK MOBILE tool, sold separately.

Program bypass option:

IF THE VEHICLE IS NOT EQUIPPED
WITH FUNCTIONAL HOOD PIN:

Hood trigger (Output Status).

NOTES

| NO KEY TAKEOVER
---|---
| The module will shut down the vehicle as soon as the drivers door is opened.
| The vehicles OEM remote and SmartKey are still operable during remote start.
| DO NOT use a standard test-light on these circuits. Only use a computer-safe test-light or logic probe.

MANDATORY INSTALL

* HOOD PIN

HOOD STATUS: THE HOOD PIN SWITCH MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF. Notice: the installation of safety elements are mandatory. The hood pin is an essential security element and must be installed.
THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.

PARTS REQUIRED (NOT INCLUDED)

| FLASH LINK UPDATER,
---|---
| FLASH LINK MANAGER SOFTWARE | PROGRAMME
| Microsoft Windows Computer with Internet connection Ordinateur Microsoft Windows avec connection Internet

OR

| FLASH LINK MOBILE
---|---
| FLASH LINK MOBILE APP
| Smartphone AndroId or iOS with Internet connection (provider charges may apply).

MANDATORY

HOOD PIN

REMOTE START SAFETY OVERRIDE SWITCH

VALET SWITCH

Part #: RSPB available, Sold separately.
Notice: the installation of safety elements are mandatory. The hood pin and the valet switch are essential security elements and must be installed.

STAND ALONE CONFIGURATION

Program bypass option
OEM Remote Stand Alone Remote Starter:

Program bypass option with oem remote:

Program bypass option with RF KIT antenna:

REMOTE STARTER FUNCTIONALITY

| All doors must be closed.
---|---
| Press the OEM remote’s Lock button 3x to remote-start (or remote-stop) the vehicle.
| The vehicle will START.

REMOTE STARTER DIAGNOSTICS
MODULE RED LED

REMOTE STARTER WARNING CARD

CUT THIS WARNING CARD AND STICK IT ON A VISIBLE PLACE: or use the package RSPB, Sold separately.

WARNING
REMOTE STARTER
THE VEHICLE CAN BE STARTED BY EITHER: PRESSING THE LOCK BUTTON ON THE OEM REMOTE 3 TIMES CONSECUTIVELY OR BY A SMARTPHONE. TURN ON THE SAFETY SWITCH LOCATED UNDER THE DASHBOARD BEFORE WORKING  ON THE VEHICLE.

DESCRIPTION

AUTOMATIC TRANSMISSION WIRING CONNECTION

DCRYPTOR PROGRAMMING PROCEDURE

Parts required (not included)

| FLASH LINK UPDATER
---|---
| FLASH LINK MANAGER
SOFTWARE | PROGRAMME
| Microsoft Windows Computer with Internet connection Ordinateur Microsoft Windows avec connection Internet

OR

| FLASH LINK MOBILE
---|---
| FLASH LINK MOBILE APP
| Smartphone AndroId or iOS with Internet connection (provider charges may apply).

BEFORE PROGRAMMING SET THE UNIT OPTIONS AND SAVE.

Press and hold the programming button:
Connect the 4-PIN Data-link connector.
↳ The BLUE, RED, YELLOW and BLUE & RED LEDs will alternatively illuminate.

Release the programming button when the LED is BLUE.
If the LED is not solid BLUE disconnect the 4-Pin connector (Data-Link) and go back to step 1.Insert the required remaining connectors.

Do not press the brake pedal.
Press the Push-to-Start button twice to turn on the ignition. Press and release the programming button once (1x).
↳ The BLUE LED will turn off.
Wait,
↳ The BLUE LED will flash rapidly.

Disconnect all the connectors and after the Data-Link (4-pins) connector.

Use the tool:
FLASH LINK UPDATER or FLASH LINK MOBILE to visit the DCryptor menu.
*Parts required (not included)AFTER DCRYPTOR PROGRAMMING COMPLETED Go back to the vehicle and reconnect the 4-Pin (Data-Link) connector and after, all the remaining connector.

The module is now programmed.
REMOTE STARTER
Test the remote starter. Remote start the vehicle.

OPTIONAL RF-KIT PROGRAMMING

PROGRAM BYPASS OPTION

Program bypass option:
H2
Supported RF-KITS enable
H2 Fortin 2

OPTIONAL FORTIN RF KIT SERIES 4 OR SERIES 9 PROGRAMMING

| 1| 2| 3| 4| 5| 6
---|---|---|---|---|---|---
| | | | | |
The module must be programmed on the vehicle.| Do not press the brake pedal. Press twice the to turn on the ignition.| Press the Push-to-Start button once to turn off the
ignition.| Do not press the brake pedal. Press twice the to turn on the ignition.| Press and release the
brake pedal four times. The LED will turn off each time.| 1 BUTTON
PRESS APPROX. 12 SEC. AND WAIT FOR THE BLUE LED TO TURN OFF THEN BACK ON SOLID THEN RELEASE.| Press the Push-to-Start button once to turn off the ignition.
| | | The LED will turn ON solide.| The LED will flash rapidly.| The LED will turn off each time.| The LED will turn Off.
MAKE SURE THE IGNITION KEY HAS BEEN
IN THE OFF POSITION FOR AT LEAST 5 SECONDS.| | | | | |
| | | | | |

VEHICLE EQUIPPED WITH OEM ALARM

Some vehicles must be UNLOCKED to disarm the OEM alarm before remote start. Enable option D2 using the FlashLink Manager. When this option is enabled the module will automatically UNLOCK before remote start and LOCK after the vehicle has remote started.

REMOTE STARTER FUNCTIONALITY

| All doors mustbe closed.
---|---
| Press the Lock button 3X the OEM remote.
| The vehicle will START.
| The module will shut down the vehicle as soon as the drivers door is opened.
| Enter the vehicle with the Smart-Key.
| Press the brake pedal.
| Press the Push-to-Start button once to start the vehicle.
| The vehicle can now be put in to gear and driven.

Module label

Notice: Updated Firmware and Installation Guides
Updated firmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest fi rmware and download the latest installation guide(s) prior to the installation of this product.
WARNING
The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever. It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualifi ed technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.

TECH SUPPORT
Tél: 514-255-HELP (4357)
1-877-336-7797
ADDENDUM GUIDE
www.fortinbypass.com
WEB UPDATE

Documents / Resources

| FORTIN 91931 Toyota Corolla 2011 Push To Start Remote Starters And Alarm Systems [pdf] Installation Guide
91931 Toyota Corolla 2011 Push To Start Remote Starters And Alarm Systems, 91931, Toyota Corolla 2011 Push To Start Remote Starters And Alarm Systems, Push To Start Remote Starters And Alarm Systems, Start Remote Starters And Alarm Systems, Remote Starters And Alarm Systems, Starters And Alarm Systems, And Alarm Systems, Alarm Systems
---|---

References

• wah damn solid

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>