Minka Lavery 6202-44 Vantage 1 Light White Metal Shade Pendant Instruction Manual

Minka Lavery 6202-44 Vantage 1 Light White Metal Shade Pendant

Product Information

The product is a lighting fixture with the item number 6202-44/66A/84. It is designed for installation in residential or commercial buildings. The fixture requires electrical wiring and a power source to function. It is important to follow the installation instructions provided in this manual to ensure proper wiring and safe usage of the product.

Product Usage Instructions

1. Before starting the installation process, make sure to shut off the power at the fuse box or circuit breaker box to avoid any electrical accidents.
2. Mounting the Fixture:
   • Refer to Fig.1 for the mounting process.
   • Securely mount the fixture using the provided mounting plate and screws.
3. Connecting the Wires:
   • Refer to Fig.2 for connecting the wires.
   • Connect the electrical wires as shown in Fig.2, ensuring that all wire connectors are secured.
   • If your outlet box has a ground wire (green or bare copper), connect the fixture’s ground wire to it. Otherwise, connect the fixture’s ground wire directly to the mounting plate using the provided green screw.
   • Tuck the wire connections neatly into the outlet box.
4. Finishing the Installation:
   • Refer to Fig.1 for finishing the installation process.
   • Place the canopy over the mounting plate and secure it with screws.
   • Install one medium base (E26) bulb up to 60 watts each or CFL or LED equivalent (bulbs not included) according to the fixture specification. Do not exceed the maximum wattage rating.
   • After completing the installation, restore power and test the fixture to ensure it is functioning correctly.

• Note: The illustration in Fig.1 is for installation purposes only and may not be identical to the fixture purchased.
• IMPORTANT: It is recommended to have the fixture installed by a qualified electrician to ensure proper wiring and installation.
• WARNING SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.

INSTALLATION INSTRUCTIONS

MOUNTING THE FIXTURE (Fig.1)

1. Shut off power at the fuse box or circuit breaker box and remove the old fixture, including the mounting hardware.
2. Carefully unpack your new fixture and lay out all the parts in a clear area. Take care not to misplace any small parts necessary for installation.
3. Attach the mounting plate (B) to outlet box (not included) using outlet box screws (C) (SIZE: #8-32N, L0.5″). The side of the mounting plate (B) marked “GND” must face out.
4. Adjust wire to desired hanging length using the small screw located on side of wire grip (F) with a flatheadscrewdriver (not included). Ensure to re-tighten set screw after wire adjustment. To straighten cord, please use a blow dryer (not included) if necessary.
5. Remove any excess wire leaving approximately 7″ beyond canopy (E) for wire connections.
   • CONNECTING THE WIRES (Fig.2)
6. Connect the electrical wires as shown in Fig.2, making sure that all wire connectors (A) are secured.
   • If your outlet box has a ground wire (green or bare copper), connect the fixture’s ground wire to it.
   • Otherwise, connect fixture’s ground wire directly to mounting plate (B) using green screw provided.
7. Tuck wire connections neatly into the outlet box.
   • FINISHING THE INSTALLATION (Fig.1)
8. Place canopy (E) over mounting plate (B) and secure with screws (D).
9. Install (1) one medium base (E26) bulb (G) up to 60 watts each or CFL or LED equivalent (not included) in accordance with the fixture specification—DO NOT EXCEED THE MAXIMUM WATTAGE RATING! (NE PAS DEPASSER LA PUISSANCE NOMINALE MAXIMALE!).

• Your installation is now complete. Return power and test the fixture.
• IMPORTANT: FIXTURE SHOULD BE INSTALLED BY A QUALIFIED ELECTRICIAN TO ENSURE PROPER WIRING AND INSTALLATION.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>