MINKA LAVERY 6414-84-L Vantage 1-Light Brushed Nickel CCT LED Wall Sconce Instruction Manual
- June 13, 2024
- MINKA LAVERY
Table of Contents
MINKA LAVERY 6414-84-L Vantage 1-Light Brushed Nickel CCT LED Wall Sconce
Product Information
The product is an item with model number 6414-XX-L. It is designed for installation as a fixture and requires electrical wiring. The fixture has five CCTs (2700K / 3000K / 3500K / 4000K / 5000K) and can be dimmed using ELV and/or LED compatible wall dimmer switches.
Product Usage Instructions
- Before starting the installation, make sure to shut off the power at the fuse box or circuit breaker.
- Remove the old fixture, including the mounting hardware.
- Take out the new fixture from the packaging and ensure that all parts are included as shown in the provided illustration.
- Position the mounting plate (A) on the wall and mark the locations of the two drywall anchors (B).
- Pre-drill holes for the drywall anchors (B) and insert them into the wall.
- Attach the mounting plate (A) to the junction box using the junction box screws (E) (Size: 832*1”L).
- Secure the mounting plate (A) to the wall by placing wood screws (C) through the holes of the mounting plate (A) and into the drywall anchors (B).
- Connect the electrical wires as shown in Fig. 2, ensuring that all wire connectors (D) are secured. If your junction box has a ground wire (green or bare copper), connect the fixture’s ground wire to it. Otherwise, connect the fixture’s ground wire directly to the mounting plate (A) using the provided green screw.
- Tuck the wire connectors neatly into the junction box.
- Select the desired CCT (2700K / 3000K / 3500K / 4000K / 5000K) by using the switch inside the fixture’s canopy.
- Align the fixture (F) onto the mounting plate (A) and secure it with the mounting screws (G).
- Once the installation is complete, restore power to the junction box and test the fixture.
Important: The fixture should be installed by a qualified electrician to ensure proper wiring and installation. When handling the fixture, avoid applying pressure to the LEDs. Hold the fixture by the base or fixture body (F) only.
Note: For dimming functionality, use ELV and/or LED compatible wall dimmer switches.
INSTALLATION INSTRUCTIONS
WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.
MOUNTING THE FIXTURE
(Fig. 1)
- Shut off power at the fuse box or circuit breaker box and remove the old fixture including the mounting hardware.
- Carefully remove the new fixture from the carton and check that all parts are included as shown in the illustration.
- Position mounting plate (A) on wall and mark the location of the two drywall anchors (B). Pre-drill holes for drywall anchors (B). Then insert drywall anchors (B) into wall.
- Attach mounting plate (A) to junction box (Not included) using junction box screws (E) (Size: 8- 32*1’’L).
- Place wood screws (C) through holes of mounting plate (A) and into drywall anchors (B) to secure mounting plate (A) to wall.
CONNECTION THE WIRES
(Fig. 2)
- Connect electrical wires as shown in Fig. 2 making sure that all wire connectors (D) are secured. If your junction box has a ground wire (green or bare copper), connect the fixture’s ground wire to it. Otherwise, connect fixture’s ground wire directly to mounting plate (A) using green screw provided.
- Tuck wire connectors neatly into the junction box.
- Connect electrical wires as shown in Fig. 2 making sure that all wire connectors (D) are secured. If your junction box has a ground wire (green or bare copper), connect the fixture’s ground wire to it. Otherwise, connect fixture’s ground wire directly to mounting plate (A) using green screw provided.
- Tuck wire connectors neatly into the junction box.
FINISHING THE INSTALLATION (Fig. 1)
- There are five CCTs (2700K / 3000K / 3500K / 4000K / 5000K) of this fixture. Select the desired CCT by using switch inside canopy of fixture.
- Align Fixture (F) onto mounting plate (A) and secure with mounting screws (G).
Your installation is now complete. Return power to the junction box and test the fixture.
CAUTION /ATTENTION: When handling the fixture, do not apply pressure to the LEDs. Hold the fixture by the base or fixture body (F) only.
IMPORTANT: THE FIXTURE SHOULD BE INSTALLED BY A QUALIFIED ELECTRICIAN TO ENSURE PROPER WIRING AND INSTALLATION.
Dimming: Dimmable with ELV and/or LED compatible wall dimmer switches.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>