MINKA LAVERY 5032-66A Muncie 2-Light Black Wall Sconce Instruction Manual

MINKA LAVERY 5032-66A Muncie 2-Light Black Wall Sconce Product

Information

• Product Name: Item#5032-66A
• Date of Manufacture: New. 2023/2/27
• Maximum Wattage Rating: 60 watts per bulb
• Compatibility: Candelabra base bulbs (up to 60W), CFL, LED equivalent
• Mounting Plate: Set#A-020-A
• Ground Screw: Included
• Mounting Screws: Size #8-32N*L1, 2 screws included
• Candle Cover: Candle Cover# CCV21070P-66A (sold separately)

Product Usage Instructions

1. Shut off power at the fuse box or circuit breaker before installation.
2. Remove the old fixture and its mounting hardware.
3. Unpack the new fixture and ensure all parts are present.
4. Attach the mounting plate (Set#A-020-A) to the outlet box using the provided mounting screws (Size: #8-32N*L1). Ensure the side marked “GND” faces out.
5. If your outlet box has a ground wire (green or bare copper), connect the fixture’s ground wire to it. Otherwise, connect the fixture’s ground wire directly to the mounting plate using the provided green screw.
6. Tuck the wire connections neatly into the outlet box.
7. Place the fixture body over the mounting plate and secure it with screws.
8. Install two candelabra base bulbs (up to 60W each) or CFL/LED equivalent bulbs (not included) according to the fixture specifications. Do not exceed the maximum wattage rating.
9. Ensure the installation is complete, then restore power to the outlet box and test the fixture.

Note: The illustration in the manual (Fig.1) is for installation reference only and may not be identical to the purchased fixture.

MOUNTING THE FIXTURE

(Fig.1)

1.  Shut off power at the fuse box or circuit breaker box and remove the old fixture including the mounting hardware.

2.  Carefully unpack your new fixture and lay out all the parts in a clear area. Take care not to misplace any small parts necessary for installation.

3.  Attach mounting plate (A) using mounting screws (B) (Size: #8-32N*L1”) to outlet box (Not included). The side of the mounting plate marked “GND” must face out
   CONNECTING THE WIRES (Fig. 2)

4. Connect electrical wires as shown in Fig. 2, making sure that all wire connectors are secured. If your outlet box has a ground wire (green or bare copper), connect fixture’s ground wire to it. Otherwise, connect fixture’s ground wire directly to mounting plate using green screw provided.

5. Tuck wire connections neatly into the outlet box. FINISHING THE INSTALLATION (Fig.1)

6.  Place fixture body (D) over mounting plate (A), and secure with screws (C).

7.  Install (2) two candelabra base bulbs (E) up to 60 watts each or CFL or LED equivalent (not included) in accordance with the fixture specification—DO NOT EXCEED THE MAXIMUM WATTAGE RATING! (NE PAS DEPASSER LA PUISSANCE NOMINALE MAXIMALE!
   Your installation is now complete. Return power to the outlet box and test the fixture..

Note llustration (Fig.1) on this manual is for installation purposes only. It may or may not be identical to the fixture purchased.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>