Minka-Lavery 1104-66A Watermill 1 Light Wide Robin Installation Guide
- June 13, 2024
- MINKA LAVERY
Table of Contents
Minka-Lavery 1104-66A Watermill 1 Light Wide Robin
Product Information
| Product Name | Item#1104-66A |
|---|---|
| Date of Manufacture | 2023/03/06 |
INSTALLATION INSTRUCTIONS
PREPARATION (Fig.1)
Fig. 1 Set#A-021-118DH
- Mounting plate
- Ground screw
- Mounting screw*2
Rod# W30-1-66A1(F1)
W30-1-66A 2(F2)
W30-H-66A *1(F3)
- Shut off power at the fuse box or circuit breaker box and remove the old fixture including the mounting hardware.
- Carefully unpack your new fixture and lay out all the parts in a clean area. Take care not to misplace any small parts necessary for installation.
- Determine the desired hanging height and thread rods (F1, F2 and F3) to all thread (G). Attach canopy (C) by screwing onto rod (F1). Carefully pass the wires through each rod during assembly.
- Attach mounting plate (A) to the junction box (not included) with mounting screws (B) (Size: #8-32N*L0.5”). The side of the mounting plate (A) with “GND” marked on it and two convex points must face out.
CONNECTING THE WIRES (Fig. 2)
Fig. 2
FIXTURE
WIRES
Black or
Smooth
- Connect the electrical wires as shown in fig 2, making sure that all wire connectors are secured. If your junction box has a ground wire (green or bare copper), connect the fixture’s ground wire to it. Otherwise, connect the fixture’s ground wire directly to mounting plate (A) using the green screw provided.
- Tuck wire connectors neatly into the junction box.
COMPLETING THE INSTALLATION (Fig. 1)
- Place canopy (C) over mounting plate (A) and secure with screws (D).
- Install (1) one medium base bulb (H) up to100 watts each or CFL or LED equivalent (not included) in accordance with the fixture specification – DO NOT EXCEED THE MAXIMUM WATTAGE RATING! (NE PAS DEPASSER LA PUISSANCE NOMINALE MAXIMALE!)
- Place glass shade (I) over socket (E) and turn to secure to the fixture.
Your installation is now complete. Return power to the junction box and test
the fixture.
Note: Illustration (Fig. 1) on this manual is for installation purposes
only. It may or may not be identical to the fixture purchased.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>