MINKA LAVERY 3982 3 Light 100W Bath Light User Manual

MINKA LAVERY 3982 3 Light 100W Bath Light

Product Information

• Product Name: Socket Ring #SKT-RING-26
• Model Number: A-022-108
• Components included: Mounting plate 1, Mounting screw 2, Ground screw * 1

Product Usage Instructions

1. Before starting the installation process, ensure that the power supply is completely shut off at the fuse box or circuit breaker.
   This is extremely important for safety reasons. (AVERTISSEMENT!
   COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.)

2. Mounting the Fixture:

3. Refer to Fig. 1 for the mounting process.

4. Select a suitable location for the fixture installation.

5. Ensure that the power supply is still turned off.

6. Attach the mounting plate (included) to the desired location using the provided mounting screws (2 screws in total).

7. Connecting the Wires:

8. Refer to Fig. 2 for the wire connections.

9. Make sure all wire connectors are securely fastened.

10. If your outlet box has a ground wire (green or bare copper), connect the fixture’s ground wire to it.

11. If there is no ground wire in the outlet box, connect the fixture’s ground wire directly to the mounting strap using the provided green screw.

12. Tuck all wire connections neatly into the wall outlet box.

13. After completing the above steps, your installation is now complete.

14. Restore power to the junction box.

15. Test the fixture to ensure it is functioning properly.

Refer to the provided Fig.1 and Fig.2 for visual assistance during the installation process.

WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.

installation instruction

MOUNTING THE FIXTURE (FIG. 1)

1. Shut off the power supply at the fuse box or circuit breaker. If necessary, remove the old fixture from wall.
   • Including the mounting hardware.
2. Carefully remove the new fixture from the carton and check that all parts are included as shown in the illustration.
3. Attach the mounting plate (E) to the outlet box using the outlet box screws (F). The side of the mounting plate marked “GND” must face out.
4. Follow the wiring instructions carefully (See Fig.2).
5. Attach the fixture wall plate (G) over the mounting plate (E) and secure with screws (D) tightly.
6. Put the glass shade (B) over the socket (C) and secure with socket ring (A).
7. Install the bulb in accordance with fixture’s specifications. (DO NOT EXCEED THE MAXIMUM WATTAGE RATING!) (NE PAS DEPASSER LA PUISSANCE NOMINALE MAXIMALE!).

CONNECTING THE WIRES (FIG. 2)

1. At this point, connect the electrical wires as shown in Fig. 2, making sure that all wire connectors are secured. If your outlet box has a ground wire (green or bare copper), connect the fixture’s ground wire to it.
   Otherwise, connect the fixture’s ground wire directly to the mounting strap using the green screw provided.

2. Tuck the wire connections neatly into the wall outlet box.
   Your installation is now complete. Return power to the junction box and test the fixture.

#3982,3983,3984-613

Documents / Resources

| MINKA LAVERY 3982 3 Light 100W Bath Light [pdf] User Manual
3982 3 Light 100W Bath Light, 3982, 3 Light 100W Bath Light, Light 100W Bath Light, 100W Bath Light, Bath Light
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>