Neomounts ABL-875 Newstar Lock for Caster Brake Instruction Manual
- October 30, 2023
- Neomounts
Table of Contents
Neomounts ABL-875 Newstar Lock for Caster Brake
ABL-875
Lock for caster brake
Part List
Assembly
-
Engage the brakes of the castor wheels with the foot panel and install the locking plate
-
Attach a padlock (not included)
Caution
- To ensure safety, please read this manual carefully before installation and follow the instructions.
- The manufacturer shall not be legally responsible for any equipment damage or person.
- The mount is designed for easy installation and removal. The manufacturer shall not be Store this manual in a secure place for future reference. legally responsible for any equipment damage personal injury caused incorrect installation or operation other than that covered this manual.
- At least two persons are needed to install or remove the product to is recommended that the mount be installed by qualified personnel only. avoid hazard of falling objects.
- Please carefully inspect the area where the mount is to be installed:
- Avoid places that are subject to high temperatures, humidity or contact with water.
- Do not install the product near air conditioning vents or areas with excess dust and fumes. Only install on vertical walls and avoid slanted surfaces.
- Do not install places subject to any shock c vibration.
- Do not install in places subject to direct exposure to bright light, as it may cause eye fatigue when viewing the display panel.
- Maintain sufficient space around the display to ensure adequate ventilation.
- To ensure safe installation, first check the structure of the wall, ceiling floor and select a secure mounting location.
- The wall, ceiling or floor should be strong enough to sustain a weight of at least four times of the display and mount combined. The mounting location must be able to withstand earthquake: other strong shock.
- Do not modify any accessories or use broken parts. Contact your dealer with any questions.
- Tighten all screws (do not exert excessive force to avoid breaking the screw or damaging its thread).
- Drill holes and bolts will be left in the wall, ceiling or floor once the display and bracket are removed. Stains may occur after extended use.
- Since the manufacturer has way to control the wall, ceiling or floor type and installation of the mount, the warranty of the product shall only cover the body of the mount. The warranty period of the product is 5 years.
- Please consult the English language manual for any dispute on conditions.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>