AIRZONE AZAI6WSCGR2 AIDOO Residential WiFi Adapter for Gree VRF Mini Splits User Guide
- June 10, 2024
- AIRZONE
Table of Contents
AIRZONE AZAI6WSCGR2 AIDOO Residential WiFi Adapter for Gree VRF Mini
Splits
AIDOO WI-FI GREE VRF
The AIDOO WI-FI GREE VRF is a device that enables remote management and integration of units from the cloud. It can be controlled using the Airzone Cloud App, which is available for both iOS and Android. The device features wireless Wi-Fi connectivity and is powered externally by the indoor unit.
Product Features
- Wireless Wi-Fi connection
- Externally powered by the indoor unit
- Compatible with units from various brands
- Online control with the Airzone Cloud App
Product Usage Instructions
To use the AIDOO WI-FI GREE VRF, follow the steps below:
- Install the device in a location that is easily accessible and within range of your Wi-Fi network.
- Connect the device to the Gree VRF connector using the provided cable.
- Connect the device to the indoor unit using the provided cable.
- Power on the indoor unit to power on the AIDOO WI-FI GREE VRF.
- Download and install the Airzone Cloud App on your iOS or Android device.
- Launch the Airzone Cloud App and follow the on-screen instructions to connect to your Wi-Fi network and pair with the AIDOO WI-FI GREE VRF.
- You can now remotely manage and integrate units from the cloud using the Airzone Cloud App.
Note: For further information about our products, visit airzonecontrol.com.
AIDOO WI-FI GREE VRF
Device to manage and integrate units remotely from the Cloud. Online control with the “Airzone Cloud” App (available for iOS and Android). Wireless Wi-Fi connection. Externally powered by the indoor unit.
Features:
- Control of the parameters of the unit.
- Communication errors detection.
- Temperature and operating mode time schedules.
- Multi-user and multi-session.
- Port for integration via Modbus protocol.
For further information about our products, go to airzonecontrol.com
TECHNICAL SPECS
| Type of power supply | Vdc |
|---|---|
| V max | 18 V |
| I max | 137.5 mA |
| V in | 12 – 16 V |
| Consumption | 0.85 W |
| Type of cable | Gree VRF connector |
| Wire length | 2.5 m (8.2 ft) |
WI-FI Communication
| Protocol | WI-FI CERTIFIED TM 802.11b/g/n (802.11n up to 150 Mbps) |
|---|---|
| Model | ESP-WROOM-32 |
| Communication frequency | 2.4 GHz |
| Maximum power – Antenna power | 20 dBm |
| Sensitivity | – 97 dBm |
| IP address | DHCP |
Bluetooth Communication
| Protocol | Bluetooth v4.2 BR/EDR and BLE specification |
|---|---|
| Bluetooth class | Class-1, class-2 and class-3 transmitter |
RS-485 Port
Shielded twisted pair| 2 x 0.22 + 2 x 0.5 mm2 (AWG 23 – 2 wired + AWG 20 – 2
wired)
---|---
Communication protocol| RS-485
Par – 19200 bps
Operating temperatures
| Storage | – 20 … 70 ºC (- 4 … 158 ºF) |
|---|---|
| Operation | 0 … 45 ºC (32 … 113 ºF) |
| Operating humidity range | 5 … 90 % (non-condensing) |
Mechanical aspects
| Protection class | IP 41 |
|---|---|
| Weight | 130 g (0.29 lb) |
Check the indoor units compatible:
FCC / ISED
This device complies with FCC / ISED regulatory notices. 
DEVICE ELEMENTS
| Nº | Description |
|---|---|
| 1 | Cable Gree VRF |
| 2 | RS-485 port |
| 3 | Indoor unit port |
| 4 | Device reboot |
| 5 | Association process reset |
| 6 | Power supply |
| 7 | External power input |
SELF-DIAGNOSIS
| Nº | Meaning |
|---|---|
| **** | Connecting to WI-FI network |
| Connected to WI-FI network | Steady |
| Connected to the server | Steady |
| Not configured | Off |
| **** | Cloud communication |
| **** | Microprocessor activity |
| **** | Power supply |
| A | Data transmission to the indoor unit |
| B | Data reception from the indoor unit |
ASSEMBLY AND CONNECTION
Important: Wired controller required XK46 or equivalent. The unit controller must remain working in parallel with your Aidoo.
- Perform the assembly following the next step:
- Screw attachment.
- Double-sided adhesive attachment.
- Disconnect the indoor unit.
- Connect the Aidoo to the terminals of the indoor unit using the supplied number cable, H1 and H2.
- Connect the Aidoo to power supply. Power the indoor unit. Check the LEDs (see Self-diagnosis section).
- Download the app and follow the steps bellow for its setting. Access the support section to see the user manual.
Important: The equipment shall be supplied by a limited power source meeting class PS2 of the standard IEC 62368-1.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>