Minka Lavery 4155484 7 x 5 Inch 100 W 3 Light Medium Bracket Installation Guide

Minka Lavery 4155484 7 x 5 Inch 100 W 3 Light Medium Bracket

Product Information

The product is a fixture (Item# 6543) that is designed to be mounted on a junction box. It includes a mounting plate, fixture body, glass shade, metal ring, screw shell, and necessary screws and wire connectors. The fixture has specific specifications for bulb installation and a maximum wattage rating.

Product Usage Instructions

1. Before starting the installation, ensure that the power is shut off at the fuse or circuit breaker.

2. Remove the old fixture and its mounting hardware.

3. Take the new fixture out of the carton and verify that all the parts are included as shown in the illustration.

4. Attach the mounting plate (A) to the junction box using the provided screws (B). Make sure that the side of the mounting plate marked GND faces out.

5. Connect the electrical wires according to Fig. 2. Ensure that all wire connectors are securely attached. If your outlet box has a ground wire (green or bare copper), connect the fixture’s ground wire to it. Otherwise, connect the fixture’s ground wire directly to the mounting plate using the green screw provided. After connecting the wires, carefully tuck them inside the outlet box.

6. Place the fixture body (D) over the mounting plate (A) and secure it with screws (C).

7. Attach the glass shade (E) and metal ring (H) over the socket.
   Fasten them with the screw shell (F) using the spanner (G) provided.

8. Install a bulb (not included) according to the fixture’s specifications. Make sure not to exceed the maximum wattage rating.

9. Once the installation is complete, restore power and test the fixture.

Note: The illustration (Fig.1) in the manual is for installation reference only and may not be identical to the purchased fixture.

WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.

INSTALLATION INSTRUCTIONS

MOUNTING THE FIXTURE (Fig.1)

1. Shut off the power at the circuit breaker and remove the old fixture, including the mounting hardware.
2. Carefully remove the fixture from the carton and check that all parts are included as shown in the illustration.
3. Attach mounting plate (A) to the junction box using the screws (B). The side of the mounting plate marked “GND” must face out.
   • CONNECTING THE WIRES (Fig. 2)
4. At this point, connect the electrical wires as shown in Fig. 2, making sure that all wire connectors are secured. If your outlet box has a ground wire (green or bare copper), connect the fixture’s ground wire to it. Otherwise, connect the fixture’s ground wire directly to the mounting plate using the green screw provided. After the wires are connected, tuck them carefully inside the outlet box.
   • FINISHING THE INSTALLATION (Fig.1)
5. Place fixture body (D) over mounting plate (A) and secure with screws (C).
6. Place the glass shade (E) and Metal Ring (H) over the socket and fasten with screw shell (F) by spanner (G) provided.
7. Install the bulb (not included) in accordance with the fixture’s specifications. (DO NOT EXCEED THE MAXIMUM WATTAGE RATING!)(NE PAS DEPASSER LA PUISSANCE NOMINALE MAXIMALE!). Your installation is now complete. Return power and test the fixture.

Note: Illustration (Fig.1) on this manual is for installation purposes only. It may or may not be identical to the fixture purchased.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>